Actions
Juniper ACX2100 » History » Revision 1
Revision 1/5
| Next »
laforge, 10/29/2021 11:19 AM
Juniper ACX2100¶
This is an Access Router that can carry up to 16x E1/T1 lines over SAToP/MPLS/Ethernet
boot log¶
ELF file is 32 bit Loading .text @ 0x00010060 (194856 bytes) Loading .rodata @ 0x0003f988 (13601 bytes) Loading .rodata.str1.4 @ 0x00042eac (16496 bytes) Loading set_Xcommand_set @ 0x00046f1c (92 bytes) Loading .rodata.cst4 @ 0x00046f78 (36 bytes) Loading .data @ 0x00047000 (13544 bytes) Loading .data.rel.ro @ 0x0004a4e8 (120 bytes) Loading .data.rel @ 0x0004a560 (320 bytes) Loading .data.rel.ro.local @ 0x0004a6a0 (288 bytes) Loading .data.rel.local @ 0x0004a7c0 (68 bytes) Loading .got2 @ 0x0004a804 (4172 bytes) Loading .fixup @ 0x0004b850 (584 bytes) Loading .sdata @ 0x0004ba98 (80 bytes) Clearing .sbss @ 0x0004bae8 (128 bytes) Clearing .bss @ 0x0004bb68 (9440 bytes) ## Starting application at 0x00010060 ... Consoles: U-Boot console Will try to boot from nand-flash0 FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4 (venky@bng-junos-pool62.juniper.net, Tue Dec 3 12:09:59 IST 2013) Memory: 1536MB Trying to boot from nand-flash0 Loading /boot/defaults/loader.conf /kernel data=0x9c9e24+0xa9f6c syms=[0x4+0x89470+0x4+0xc865f] Hit [Enter] to boot immediately, or space bar for command prompt. Booting [/kernel]... Kernel entry at 0xa00000c0 ... GDB: debug ports: uart GDB: current port: uart KDB: debugger backends: ddb gdb KDB: current backend: ddb platform_early_bootinit: MX-PPC Series Early Boot Initialization mxppc_set_re_type: hw.board.type is ACX-2100 WDOG initialized Copyright (c) 1996-2014, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 12.3X54-D15.3 #0: 2014-11-29 23:21:25 UTC builder@faranth.juniper.net:/volume/build/junos/12.3/service/12.3X54-D15.3/obj-powerpc/junos/bsd/kernels/JUNIPER-PPC/kernel WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant Timecounter "decrementer" frequency 62500000 Hz quality 0 cpu0: Freescale e500v2 core revision 5.1 cpu0: HID0 80004000<EMCP,TBEN> real memory = 1585446912 (1512 MB) avail memory = 1553989632 (1482 MB) Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot) Security policy loaded: Junos MAC/veriexec (mac_veriexec) Security policy loaded: JUNOS MAC/pcap (mac_pcap) MAC/veriexec fingerprint module loaded: SHA1 MAC/veriexec fingerprint module loaded: SHA256 ETHERNET SOCKET BRIDGE initialising Initializing M/T platform properties .. nexus0: <PPC e500 Nexus device> ocpbus0: <on-chip peripheral bus> on nexus0 openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0 uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0 lbc0: <Freescale 8533 Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 17,16 on ocpbus0 cfi0: <AMD/Fujitsu - 8MB> iomem 0xffc00000-0xffffffff on lbc0 fsyspld0 iomem 0xfef00000-0xfef00fff on lbc0 ramdev0 iomem 0xfee1f000-0xfee1ffff on lbc0 i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0 8564 rtc0: <8564 RTC> on i2c0 USB2513i usb hub0: <USB2513Bi usb hub> on i2c0 tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address 40:a6:77:13:89:7f miibus0: <MII bus> on tsec0 brgphy0: <BCM54610 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0 tsec1: hardware MAC address 02:00:00:00:00:04 miibus1: <MII bus> on tsec1 gentbi0: <Generic ten-bit interface> on miibus1 gentbi0: 1000baseSX-FDX, 1000baseT-FDX, auto ehci0: <Frescale Integrated USB 2.0 controller> iomem 0xf7f22000-0xf7f22503 irq 44 on ocpbus0 usb0: EHCI version 1.0 usb0 on ehci0 usb0: USB revision 2.0 uhub0: Freescale EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 1 port with 1 removable, self powered uhub1: SMSC USB2513Bi, class 9/0, rev 2.00/b.a0, addr 2 uhub1: multiple transaction translators uhub1: 3 ports with 3 removable, self powered umass0: vendor 0x13fe USB DISK 2.0, rev 2.00/1.00, addr 3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:0:0:-1: Attached to scbus0 Initializing product: 140 .. Setting up M/T interface operations and attributes platform_cookie_read not implemented ###PCB Group initialized for udppcbgroup ###PCB Group initialized for tcppcbgroup da0 at umass-sim0 bus 0 target 0 lun 0 da0: < USB DISK 2.0 PMAP> Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C) Kernel thread "wkupdaemon" (pid 45) exited prematurely. Trying to mount root from ufs:/dev/da0s2a Invalid time in real time clock. Check and reset the date immediately! Process-1 beginning MFSROOT initialization... Creating MFSROOT... /dev/md0: 25.0MB (51196 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 6.25MB, 400 blks, 896 inodes. super-block backups (for fsck -b #) at: 32, 12832, 25632, 38432 Populating MFSROOT... Setting up mounts... Changing Root to MFSROOT... Continuing boot from MFSROOT... Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md1... J Verified manifest signed by PackageProduction_12_3_0 Verified jboot signed by PackageProduction_12_3_0 Verified jbase-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0 Setting up ACX specific options Mounted jkernel package on /dev/md2... Verified manifest signed by PackageProduction_12_3_0 Verified jkernel-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0 Mounted jpfe package on /dev/md3... Mounted jdocs package on /dev/md4... Verified manifest signed by PackageProduction_12_3_0 Verified jdocs-12.3X54-D15.3 signed by PackageProduction_12_3_0 Mounted jroute package on /dev/md5... Verified manifest signed by PackageProduction_12_3_0 Verified jroute-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0 Mounted jcrypto package on /dev/md6... Verified manifest signed by PackageProduction_12_3_0 Verified jcrypto-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0 swapon: adding /dev/da0s4WARNING: /var was not properly dismounted b as swap device Checking file systems status for recovery action... /var and /var/log bsdlabel found Checking sanity of /var [ /dev/da0s3f ] ... done (full) Checking sanity of /var/log [ /dev/da0s3d ] ... done (full) Checking sanity of /config [ /dev/da0s2e ] ... done (full) ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 368832 free (40 frags, 46099 blocks, 0.0% fragmentation) ** /dev/da0s1e FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 47221 free (21 frags, 5900 blocks, 0.0% fragmentation) kern.init_chroot_path: -> /mfsmnt Automatic reboot in progress... Executing tunefs on /... Enable softupdates for /... tunefs: soft updates cannot be enabled until fsck is run tunefs: /dev/md0: failed to write superblock Enable softupdates for config... tunefs: soft updates remains unchanged as enabled Will be using platform specific rc.mount-var to mount var *** No fsck will be done by us... Enable softupdates for var... tunefs: soft updates remains unchanged as enabled tunefs: soft updates remains unchanged as enabled Mounting var... Mounting var/log... Creating initial configuration...mgd: warning: could not open /config/juniper.conf.md5: No such file or directory Setting up ACX specific options mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: . Doing initial network setup: . Initial interface configuration: additional daemons:. checking for core dump... savecore: Reboot reason(s): 0x1: power cycle/failure No dump exists Setting up ACX specific options Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /modules/peertype;/modules/ifpfLoading the IMA Link Media Layer; Attaching to media services layer Loading the IMA Group Media Layer; Attaching to media services layer e_drv;/modules/ifpfe_media;/modules/platform;/moLoading the SONET Media Layer; Attaching to media services layer dules; kld netpfe media: ifpfem_ds0 ifpfem_ds1e1 ifpfem_ds3e3 iLoading the CHMIC module fpfem_ima ifpfem_otn ifpfem_sonetkld netpfe drv: ifpfed_atm ifpfed_chmic ifpfed_controller ifpfed_ds0 ifpfed_ds1e1 ifpfed_ds3e3 ifpfed_eth ifpfed_irb ifpfed_lt ifpfed_ml_cmn ifpfed_ml_ha ifpfed_posLoading POS driver ifpfed_pppoe ifpfed_sa Loading Aggregate sonet driver ifpfed_svcs ifpfed_vtkld platform: mt_ifpfeLoading Multilink Services PICs module. Loading the M&T Platform NETPFE module kld peertype: peertype_xdpc ipsec kld. Doing additional network setup:. Starting final network daemons:. Run ACX dual root init to setup sysctls and other stuff... Boot media /dev/da0 has dual root support WARNING: JUNOS versions running on dual partitions are not same ** /dev/da0s1a FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 368832 free (40 frags, 46099 blocks, 0.0% fragmentation) setting ldconfig path: /usr/lib /opt/lib starting standard daemons: cron. Initial rc.powerpc initialization:. Lock Manager RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved. Unix Domain sockets Lock manager Lock manager 'lockmgr' started successfully. Database Initialization Utility RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com Copyright (c) 1992-2006 Birdstep Technology, Inc. All Rights Reserved. /var/pdb/profile_db initialized Profile database initialized Local package initialization:. kern.securelevel: -1 -> 1 starting local daemons:. Fri Jan 1 00:04:38 UTC 2010 platform_cookie_read not implemented Amnesiac (ttyu0) login:
Updated by laforge over 2 years ago · 1 revisions