Feature #1529
closed
Support MCS 5-9 in uplink
Added by zecke about 8 years ago.
Updated almost 4 years ago.
Description
In uplink direction, only MCS1-4 (GMSK) are supported.
- Add decoding of RLC data block header type 1 & 2
- Query the 8PSK power class (if not set, 8PSK may not be used in uplink direction), see 24.008, 10.5.5.12a
- In addition, the 8PSK capability can be indicated by the TS in the 11bit channel request format (44.060, 11.2.5a)
- Dual packet extraction for MCS7-9 is implemented but not tested
According to 44.060, 7.4.1 "If the mobile station has been assigned a TBF in EGPRS mode and the MS does not support EGPRS, or has been assigned an MCS (e.g. 8-PSK in the Uplink) that the MS does not support, the MS shall return to packet idle mode and notify higher layers (TBF establishment failure)." the PCU must not request MCS-5 if the MS hasn't uplink 8PSK capabilites, so these must be checked before requesting it.
This seems to be at least partially implemented by Aravind already. Shall this ticket be reassigned?
- Assignee deleted (
msuraev)
I'd say this is implemented but I'm not sure. In any case, TTCN3 related tests must be added to PCU_Tests_RAW.
- Related to Bug #4338: Add EGPRS tests toTTCN3 PCU_Tests_RAW added
Related code which seems to indicate it's not implemented: decoding.cpp:
int Decoding::rlc_parse_ul_data_header(struct gprs_rlc_data_info *rlc,
const uint8_t *data, GprsCodingScheme cs)
{
unsigned int cur_bit = 0;
switch(cs.headerTypeData()) {
case HEADER_GPRS_DATA :
cur_bit = rlc_parse_ul_data_header_gprs(rlc, data, cs);
break;
case HEADER_EGPRS_DATA_TYPE_3 :
cur_bit = rlc_parse_ul_data_header_egprs_type_3(rlc, data, cs);
break;
case HEADER_EGPRS_DATA_TYPE_2 :
cur_bit = rlc_parse_ul_data_header_egprs_type_2(rlc, data, cs);
break;
case HEADER_EGPRS_DATA_TYPE_1 :
cur_bit = rlc_parse_ul_data_header_egprs_type_1(rlc, data, cs);
break;
default:
LOGP(DRLCMACDL, LOGL_ERROR,
"Decoding of uplink %s data blocks not yet supported.\n",
mcs_name(cs));
return -ENOTSUP;
};
return cur_bit;
}
- Related to Feature #4286: Support configuration using 8PSK on dowlink while staying GMSK-only on uplink added
- Status changed from New to Resolved
EGPRS has three header types; all three types are suppored by rlc_parse_ul_data_header()
Also available in: Atom
PDF