Revision 1 - History - Ettus USRP B2xx family - Ettus USRP B2xx family - Cellular Network Infrastructure - Open Source Mobile Communications

Actions

History

Ettus USRP B2xx family » History » Revision 1

Revision 1/26 | Next »
Anonymous, 02/19/2016 10:47 PM

This page will describe how to install and configure OpenBSC, Osmo-BTS, Osmo-TRX, Osmo-PCU and OpenGGSN to create an opensource 2G/GSM network with your Ettus USRP B200/B210 SDR hardware.

This page in under development, please stay tuned.

Pre-Req:

The following guide is created on Ubuntu 14.14.03 LTS 64bit with kernel 3.19.0-26-lowlatency

Files (6)

Updated by over 8 years ago · 1 revisions

ggsn.conf	ggsn.conf	529 Bytes	GGSN config file, put it to /etc/ggsn.conf	, 09/23/2015 04:07 PM
extensions.conf	extensions.conf	1.5 KB	Asterisk config file, put it to /etc/asterisk/extensions.conf	, 09/23/2015 04:08 PM
osmo-pcu.cfg	osmo-pcu.cfg	1.04 KB	Example Osmo-PCU config file	, 09/23/2015 04:09 PM
sgsn.conf	sgsn.conf	1.12 KB	Example Osmo-SGSN config file	, 09/23/2015 04:09 PM
openbsc.conf	openbsc.conf	3.98 KB	Example OpenBSC config file	, 09/23/2015 04:09 PM
osmo-bts.cfg	osmo-bts.cfg	593 Bytes	Example OsmoBTS config file	laforge, 04/12/2017 01:09 PM

Project

General

Profile

Cellular Network Infrastructure

Sidebar¶

Sub-projects¶

Wiki

Tags

Ettus USRP B2xx family » History » Revision 1