Feature #6229
closed
osmo-epdg: Implement s6b interface (Diameter) AAA <> PGW
Added by pespin 7 months ago.
Updated about 2 months ago.
Description
Create a S6B diameter module to connect (or listen) to PGW (open5gs-smfd).
S6b is defined in 3GPP TS 29.273 section 9
9.1.2.2 Authorization Procedures when using PMIPv6 or GTPv2:
- Authorization Request (AAR) PGW->AAA
- Authorization Answer (AAA) PGW<-AAA
9.1.2.3 PDN GW Initiated Session Termination Procedures:
- S6b Session Termination Request PGW->AAA
- S6b Session Termination Answer PGW<-AAA
9.1.2.4 3GPP AAA Initiated Session Termination Procedures:
- S6b Abort Session Request PGW<-AAA
- S6b Abort Session Answer PGW->AAA
- S6b Session Termination Request PGW<-AAA
- S6b Session Termination Answer PGW->AAA
9.1.2.5 Service Authorization Information Update Procedures
- S6b Re-authorization request PGW->AAA
- S6b Re-authorization response PGW<-AAA
The AAA / AAAR is also explained in the clause "C.1 Update PDN GW Address" of 3GPP TS 23.402 section 7.2.4 "Initial Attach with GTP on S2b":
C.1) Step C.1 is the same as Step C of clause 7.2.1, with the following addition:
- when informing the 3GPP AAA Server of the PDN GW identity, the selected PDN GW also indicates the
selected S2b protocol variant (here GTP); this allows the option for the 3GPP AAA Server or 3GPP AAA
Proxy not to return to the PDN GW PMIP specific parameters (e.g. static QoS Profile, Trace Information,
APN-AMBR) if GTP is used over S2b; the PDN GW shall ignore those parameters if received from the
3GPP AAA Server or 3GPP AAA Proxy.
- The PDN GW forwards to the PCRF in the IP-CAN Session Establishment procedure following information
extracted from User Location Information it may have received from the ePDG:
- The UE local IP address and optionally UDP or TCP source port number (if NAT is detected).
- WLAN location information in conjunction with the Age of this information.
"Step C of clause 7.2.1":
5) The selected PDN GW informs the 3GPP AAA Server of the PDN GW identity. The 3GPP AAA Server then
informs the HSS of the PDN GW identity and APN associated with the UE's PDN Connection. The message
includes information that identifies the PLMN in which the PDN GW is located. This information is registered in
the HSS as described in clause 12. The PDN GW shall only use the APN-AMBR and Default Bearer QoS
received from the 3GPP AAA server in this step if these parameters have not been received in step 4.
- % Done changed from 0 to 20
I have written the .dia spec files in osmo-epdg.git and generated the erl files (also had to write those for RFC 5777 which is quite long...).
I have those in my osmo-epdg.git branch "pespin/master".
I also have AAR/AAA message validation done in osmo-ttcn3-hacks.git branch "pespin/epdg".
- Status changed from New to In Progress
- % Done changed from 20 to 50
- Subject changed from create a S6b diameter module to osmo-epdg: Implement s6b interface (Diameter) AAA <> PGW
In here we basically still miss the Re-auth procedure (9.1.2.5, 9.2.2.6), which is not really needed for now afaict:
9.1.2.5 Service Authorization Information Update Procedures
- S6b Re-authorization request PGW->AAA
- S6b Re-authorization response PGW<-AAA
Another thing which needs to be resolved is for "9.1.2.4 3GPP AAA Initiated Session Termination Procedures", current diameter S6b ASR message fails to encode in https://gerrit.osmocom.org/c/erlang/osmo-epdg/+/36262/
- Status changed from In Progress to Resolved
- % Done changed from 50 to 100
Also available in: Atom
PDF
