Project

General

Profile

Statistics
| Branch: | Tag: | Revision:

simtrace/hardware/kicad @ master

Name Size
  lib
SIMtrace-cache.lib 17.7 KB
SIMtrace.cmp 6.99 KB
SIMtrace.kicad_pcb 648 KB
SIMtrace.net 37.5 KB
SIMtrace.pro 879 Bytes
SIMtrace.sch 52.5 KB
microsimffc.cmp 908 Bytes
microsimffc.net 1.14 KB
microsimffc.pro 1.24 KB
microsimffc.sch 6.48 KB
simadapter1.brd 8.02 KB
simadapter1.cmp 313 Bytes
simadapter1.net 389 Bytes
simadapter1.pro 1.59 KB
simadapter1.sch 1.83 KB
simcable.brd 19.5 KB
simffc.brd 34.3 KB
simffc.net 1.12 KB
simffc.pro 1.45 KB
simffc.sch 6.48 KB
sym-lib-table 312 Bytes

Latest revisions

# Date Author Comment
6202db50 10/01/2019 01:00 PM Kévin Redon

Merge branch 'v1.5'

Change-Id: I19221ac1e88ee4ba6b74705f898c145fe76724a2
2714c8d3 10/01/2019 12:57 PM Kévin Redon

Merge branch 'v1.4'

Change-Id: Ie406e2d62adbd2e9914b04b9d874d2bd520026a9
83d28736 10/01/2019 12:44 PM Kévin Redon

Merge branch 'v1.3'

Change-Id: I8ecde4dd1b6ff749e762bb2c42f99df04723c753
02405c01 10/01/2019 12:34 PM Kévin Redon

Merge branch 'v1.2_production'

Change-Id: Ib4cba75e8e3cb795b38db588f6ad452e1ff26faa
dc4cb0a9 10/01/2019 12:28 PM Kévin Redon

Merge branch 'v1.1_production'

Change-Id: Ie064c379c9625b3cf6910912fd859e8e4dd0326e
8c202c01 10/01/2019 12:21 PM Kévin Redon

Merge branch 'v1.0_production'

Change-Id: I481a6b1802993ceb6d02e7edcbd3b6d853f1e487
28eff3dc 10/01/2019 11:09 AM Kévin Redon

schematic: add DNP note on JTAG and UART debug connectors

Change-Id: Id1c03418af021ce8febd666946bed3d8c01ceb77
bea9406b 09/03/2019 07:13 PM Kévin Redon

schematic: mark USB reset circuit as dot no place

the additional circuit to reset USB (by pulling D+ low) is not
required anymore since the USB controller in the SAM3S integrates
this capability.
the SAM3S-EK Development Board also demonstrates only the inline...
614ce7a7 09/03/2019 06:33 PM Kévin Redon

schematic: mark R19 as dot no place

R19 pulls VCC_PHONE low for better power on detection.
but the voltage divider R20 + R21 also pull this line low using
a stronger pull down resistor ok 20 kOhm.
thus R19 is unnecessary-

this change has been tested with a real simtrace device....
af693b2e 09/03/2019 03:52 PM Kévin Redon

schematic: rename NP to DNP for clarity

Change-Id: I06c38e353f2b804faa0dcbf4a9405d5d5042af3e

View revisions

Also available in: Atom

Add picture from clipboard (Maximum size: 48.8 MB)