RS232 vs ITU V24 Signal Names » History » Version 2
laforge, 11/22/2022 12:50 PM
| 1 | 2 | laforge | h1. RS232 vs ITU-T V.24 Signal Names |
|---|---|---|---|
| 2 | 1 | laforge | |
| 3 | There are unfortunately a lot of different terms/names used for serial interfaces, depending on which context/spec you are looking at. This table provides a mapping of the most common signals between different specs: |
||
| 4 | |||
| 5 | |_.Common Name|_.RS232|_.ITU-T V.24|_.Description| |
||
| 6 | |GND|AB|102|Signal/System Ground| |
||
| 7 | |TXD|BA|103|Received data| |
||
| 8 | |RXD|BB|104|Transmitted data| |
||
| 9 | |RTS|CA|105|Request to Send| |
||
| 10 | |CTS|CB|106|Claer to Send| |
||
| 11 | |DSR|CC|107|Data Set Ready| |
||
| 12 | |DTR|CD|108/2|Data Terminal Ready| |
||
| 13 | |CD|CF|109|Carrier detect| |
||
| 14 | |-|-|113|Transmitter signal element timing (DTE source)| |
||
| 15 | |-|-|114|Transmitter signal element timing (DCE source)| |
||
| 16 | |-|-|115|Receiver signal element timing (DCE source)| |
||
| 17 | |RI|CE|125|Ring Indicator| |
||
| 18 | |-|-|133|Ready for receiving| |
||
| 19 | 2 | laforge | |
| 20 | h2. Full ITU V.24 table |
||
| 21 | |||
| 22 | !v24.png! |
