Retronetworking

h1. Juniper ACX2100

This is an Access Router that can carry up to 16x E1/T1 lines over SAToP/MPLS/Ethernet

h2. boot log

<pre>

ELF file is 32 bit

Loading .text @ 0x00010060 (194856 bytes)

Loading .rodata @ 0x0003f988 (13601 bytes)

Loading .rodata.str1.4 @ 0x00042eac (16496 bytes)

Loading set_Xcommand_set @ 0x00046f1c (92 bytes)

Loading .rodata.cst4 @ 0x00046f78 (36 bytes)

Loading .data @ 0x00047000 (13544 bytes)

Loading .data.rel.ro @ 0x0004a4e8 (120 bytes)

Loading .data.rel @ 0x0004a560 (320 bytes)

Loading .data.rel.ro.local @ 0x0004a6a0 (288 bytes)

Loading .data.rel.local @ 0x0004a7c0 (68 bytes)

Loading .got2 @ 0x0004a804 (4172 bytes)

Loading .fixup @ 0x0004b850 (584 bytes)

Loading .sdata @ 0x0004ba98 (80 bytes)

Clearing .sbss @ 0x0004bae8 (128 bytes)

Clearing .bss @ 0x0004bb68 (9440 bytes)

## Starting application at 0x00010060 ...

Consoles: U-Boot console  

Will try to boot from

nand-flash0

FreeBSD/PowerPC U-Boot bootstrap loader, Revision 2.4

(venky@bng-junos-pool62.juniper.net, Tue Dec  3 12:09:59 IST 2013)

Memory: 1536MB

Trying to boot from nand-flash0

Loading /boot/defaults/loader.conf 

/kernel data=0x9c9e24+0xa9f6c syms=[0x4+0x89470+0x4+0xc865f]

Hit [Enter] to boot immediately, or space bar for command prompt.

Booting [/kernel]...               

Kernel entry at 0xa00000c0 ...

GDB: debug ports: uart

GDB: current port: uart

KDB: debugger backends: ddb gdb

KDB: current backend: ddb

platform_early_bootinit: MX-PPC Series Early Boot Initialization

mxppc_set_re_type: hw.board.type is ACX-2100

WDOG initialized

Copyright (c) 1996-2014, Juniper Networks, Inc.

All rights reserved.

Copyright (c) 1992-2006 The FreeBSD Project.

Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994

        The Regents of the University of California. All rights reserved.

JUNOS 12.3X54-D15.3 #0: 2014-11-29 23:21:25 UTC

    builder@faranth.juniper.net:/volume/build/junos/12.3/service/12.3X54-D15.3/obj-powerpc/junos/bsd/kernels/JUNIPER-PPC/kernel

WARNING: debug.mpsafenet forced to 0 as ipsec requires Giant

Timecounter "decrementer" frequency 62500000 Hz quality 0

cpu0: Freescale e500v2 core revision 5.1

cpu0: HID0 80004000<EMCP,TBEN>

real memory  = 1585446912 (1512 MB)

avail memory = 1553989632 (1482 MB)

Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)

Security policy loaded: Junos MAC/veriexec (mac_veriexec)

Security policy loaded: JUNOS MAC/pcap (mac_pcap)

MAC/veriexec fingerprint module loaded: SHA1

MAC/veriexec fingerprint module loaded: SHA256

ETHERNET SOCKET BRIDGE initialising

Initializing M/T platform properties ..

nexus0: <PPC e500 Nexus device>

ocpbus0: <on-chip peripheral bus> on nexus0

openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xf7f40000-0xf7f600b3 on ocpbus0

uart0: <16550 or compatible> iomem 0xf7f04500-0xf7f0450f irq 58 on ocpbus0

uart0: console (9600,n,8,1)

uart1: <16550 or compatible> iomem 0xf7f04600-0xf7f0460f irq 58 on ocpbus0

lbc0: <Freescale 8533 Local Bus Controller> iomem 0xf7f05000-0xf7f05fff,0xf8000000-0xffffffff irq 17,16 on ocpbus0

cfi0: <AMD/Fujitsu - 8MB> iomem 0xffc00000-0xffffffff on lbc0

fsyspld0 iomem 0xfef00000-0xfef00fff on lbc0

ramdev0 iomem 0xfee1f000-0xfee1ffff on lbc0

i2c0: <MPC85XX OnChip i2c Controller> iomem 0xf7f03000-0xf7f03014 irq 59 on ocpbus0

8564 rtc0: <8564 RTC> on i2c0

USB2513i usb hub0: <USB2513Bi usb hub> on i2c0

tsec0: <eTSEC ethernet controller> iomem 0xf7f24000-0xf7f24fff irq 45,46,50 on ocpbus0

tsec0: hardware MAC address 40:a6:77:13:89:7f

miibus0: <MII bus> on tsec0

brgphy0: <BCM54610 10/100/1000baseTX PHY> on miibus0

brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto

tsec1: <eTSEC ethernet controller> iomem 0xf7f25000-0xf7f25fff irq 51,52,56 on ocpbus0

tsec1: hardware MAC address 02:00:00:00:00:04

miibus1: <MII bus> on tsec1

gentbi0: <Generic ten-bit interface> on miibus1

gentbi0:  1000baseSX-FDX, 1000baseT-FDX, auto

ehci0: <Frescale Integrated USB 2.0 controller> iomem 0xf7f22000-0xf7f22503 irq 44 on ocpbus0

usb0: EHCI version 1.0

usb0 on ehci0

usb0: USB revision 2.0

uhub0: Freescale EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub0: 1 port with 1 removable, self powered

uhub1: SMSC USB2513Bi, class 9/0, rev 2.00/b.a0, addr 2

uhub1: multiple transaction translators

uhub1: 3 ports with 3 removable, self powered

umass0: vendor 0x13fe USB DISK 2.0, rev 2.00/1.00, addr 3

umass0: SCSI over Bulk-Only; quirks = 0x0000

umass0:0:0:-1: Attached to scbus0

Initializing product: 140 ..

Setting up M/T interface operations and attributes

platform_cookie_read not implemented

###PCB Group initialized for udppcbgroup

###PCB Group initialized for tcppcbgroup

da0 at umass-sim0 bus 0 target 0 lun 0

da0: < USB DISK 2.0 PMAP> Removable Direct Access SCSI-0 device 

da0: 40.000MB/s transfers

da0: 7640MB (15646720 512 byte sectors: 255H 63S/T 973C)

Kernel thread "wkupdaemon" (pid 45) exited prematurely.

Trying to mount root from ufs:/dev/da0s2a

Invalid time in real time clock.

Check and reset the date immediately!

Process-1 beginning MFSROOT initialization...

Creating MFSROOT...

/dev/md0: 25.0MB (51196 sectors) block size 16384, fragment size 2048

        using 4 cylinder groups of 6.25MB, 400 blks, 896 inodes.

super-block backups (for fsck -b #) at:

 32, 12832, 25632, 38432

Populating MFSROOT...

Setting up mounts...

Changing Root to MFSROOT...

Continuing boot from MFSROOT...

Attaching /packages/jbase via /dev/mdctl...

Mounted jbase package on /dev/md1...

J

Verified manifest signed by PackageProduction_12_3_0

Verified jboot signed by PackageProduction_12_3_0

Verified jbase-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0

Setting up ACX specific options

Mounted jkernel package on /dev/md2...

Verified manifest signed by PackageProduction_12_3_0

Verified jkernel-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0

Mounted jpfe package on /dev/md3...

Mounted jdocs package on /dev/md4...

Verified manifest signed by PackageProduction_12_3_0

Verified jdocs-12.3X54-D15.3 signed by PackageProduction_12_3_0

Mounted jroute package on /dev/md5...

Verified manifest signed by PackageProduction_12_3_0

Verified jroute-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0

Mounted jcrypto package on /dev/md6...

Verified manifest signed by PackageProduction_12_3_0

Verified jcrypto-ppc-12.3X54-D15.3 signed by PackageProduction_12_3_0

swapon: adding /dev/da0s4WARNING: /var was not properly dismounted

b as swap device

Checking file systems status for recovery action...

/var and /var/log bsdlabel found

Checking sanity of /var [ /dev/da0s3f ] ... done (full)

Checking sanity of /var/log [ /dev/da0s3d ] ... done (full)

Checking sanity of /config [ /dev/da0s2e ] ... done (full)

** /dev/da0s1a

FILE SYSTEM CLEAN; SKIPPING CHECKS

clean, 368832 free (40 frags, 46099 blocks, 0.0% fragmentation)

** /dev/da0s1e

FILE SYSTEM CLEAN; SKIPPING CHECKS

clean, 47221 free (21 frags, 5900 blocks, 0.0% fragmentation)

kern.init_chroot_path:  -> /mfsmnt

Automatic reboot in progress...

Executing tunefs on /...

Enable softupdates for /...

tunefs: soft updates cannot be enabled until fsck is run

tunefs: /dev/md0: failed to write superblock

Enable softupdates for config...

tunefs: soft updates remains unchanged as enabled

Will be using platform specific rc.mount-var to mount var

*** No fsck will be done by us...

Enable softupdates for var...

tunefs: soft updates remains unchanged as enabled

tunefs: soft updates remains unchanged as enabled

Mounting var...

Mounting var/log...

Creating initial configuration...mgd: warning: could not open /config/juniper.conf.md5: No such file or directory

Setting up ACX specific options

mgd: commit complete

Setting initial options:  debugger_on_panic=NO debugger_on_break=NO.

Starting optional daemons: .

Doing initial network setup:

.

Initial interface configuration:

additional daemons:.

checking for core dump...

savecore: Reboot reason(s): 0x1: power cycle/failure 

No dump exists

Setting up ACX specific options

Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /modules/peertype;/modules/ifpfLoading the IMA Link Media Layer; Attaching to media services layer

Loading the IMA Group Media Layer; Attaching to media services layer

e_drv;/modules/ifpfe_media;/modules/platform;/moLoading the SONET Media Layer; Attaching to media services layer

dules;

kld netpfe media: ifpfem_ds0 ifpfem_ds1e1 ifpfem_ds3e3 iLoading the CHMIC module

fpfem_ima ifpfem_otn ifpfem_sonetkld netpfe drv: ifpfed_atm ifpfed_chmic ifpfed_controller ifpfed_ds0 ifpfed_ds1e1 ifpfed_ds3e3 ifpfed_eth ifpfed_irb ifpfed_lt ifpfed_ml_cmn ifpfed_ml_ha ifpfed_posLoading POS driver

 ifpfed_pppoe ifpfed_sa Loading Aggregate sonet driver

 ifpfed_svcs ifpfed_vtkld platform: mt_ifpfeLoading Multilink Services PICs module.

Loading the M&T Platform NETPFE module

kld peertype: peertype_xdpc ipsec kld.

Doing additional network setup:.

Starting final network daemons:.

Run ACX dual root init to setup sysctls and other stuff...

Boot media /dev/da0 has dual root support

WARNING: JUNOS versions running on dual partitions are not same

** /dev/da0s1a

FILE SYSTEM CLEAN; SKIPPING CHECKS

clean, 368832 free (40 frags, 46099 blocks, 0.0% fragmentation)

setting ldconfig path: /usr/lib /opt/lib

starting standard daemons: cron.

Initial rc.powerpc initialization:.

 Lock Manager

RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com

Copyright (c) 1992-2006 Birdstep Technology, Inc.  All Rights Reserved.

Unix Domain sockets Lock manager

Lock manager 'lockmgr' started successfully.

Database Initialization Utility

RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com

Copyright (c) 1992-2006 Birdstep Technology, Inc.  All Rights Reserved.

/var/pdb/profile_db initialized

Profile database initialized

Local package initialization:.

kern.securelevel: -1 -> 1

starting local daemons:.

Fri Jan  1 00:04:38 UTC 2010

platform_cookie_read not implemented

Amnesiac (ttyu0)

login: 

</pre>