SIM card related Projects » SIMtrace 2

When the modem is reset (i.e. using the '1' or '2' commands over serial) the WWAN LED (yellow) of the corresponding modem on the qmod board should switch off.
This should be monitored by the SAM3S and any change should be displayed over serial:
"-I- 0: WWAN LED 0" when LED for modem 1 (ST12 port 0) switched off
"-I- 0: WWAN LED 1" when LED for modem 1 (ST12 port 0) switched on

This does not work for modem 2 though (ST12 port 1)