General

Profile

mschramm

  • Registered on: 03/11/2016
  • Last connection: 06/25/2019

Issues

Projects

Activity

06/20/2019

03:01 PM osmo-clock-gen Support #4064: bom / parts order / production of 3 clock-gen v2 prototypes
parts ordered

06/19/2019

06:28 PM osmo-clock-gen Support #4064 (In Progress): bom / parts order / production of 3 clock-gen v2 prototypes

06/18/2019

03:31 PM osmo-clock-gen Bug #3857 (Resolved): Use SAMD XOSC / PLL / GCLK to allow lower reference frequencies
(all TVS diodes placed)

06/13/2019

03:54 PM osmo-clock-gen Bug #3857: Use SAMD XOSC / PLL / GCLK to allow lower reference frequencies
PA14 is XIN, and is already routed to the GPIO expansion header (see #3858). As discussed with laforge, we simply don...

06/12/2019

05:50 PM osmo-clock-gen Feature #4050 (Resolved): final osmo-clock-gen v2 changes
finished compacting design and placing MTA100 header with _016e05e_.

06/11/2019

08:34 AM osmo-clock-gen Feature #4050: final osmo-clock-gen v2 changes
I did not yet find proper space and clearance for an MTA100 header, as the area is huge and bulky a possible 180° shr...

06/07/2019

03:56 PM osmo-clock-gen Feature #4050 (In Progress): final osmo-clock-gen v2 changes

06/05/2019

08:51 PM OsmocomBB Feature #4030: design breakout board for GTM900-B
mschramm wrote:
> GTM900 exposes no LED at all,
this might be not true, there are two pins with funny names and a...
07:56 PM OsmocomBB Feature #4030: design breakout board for GTM900-B
GTM900 exposes no LED at all, so the breakout only will get a power-on LED.
Should the modem reside _on_ the break...

05/29/2019

07:45 PM osmo-clock-gen Feature #3856 (Resolved): Use SAMD21 instead of SAMD11
design of v2 done

Also available in: Atom

Add picture from clipboard (Maximum size: 48.8 MB)