Bug #2357
closed
Make SI2q compatible with dynamically updated SI via RSL
Added by msuraev almost 7 years ago.
Updated about 6 years ago.
Description
After SI2q configuration is changed via vty, the SI messages can be regenerated using bts 0 resend-system-information
command. That should lead to proper update of SI2q index and count (if number of messages has changed) and should be propagated to RSL accordingly.
Right now only last message (7/7 for example) got properly updated count, others still use old value.
Note: this is for BSC-side fix, the BTS side should be fixed by gerrit 3180.
- Status changed from New to In Progress
- % Done changed from 0 to 10
Shall it be marked as CLX?
- Status changed from In Progress to Stalled
- Status changed from Stalled to In Progress
- Status changed from In Progress to Stalled
Currently TTCN tests do not perform any checks after issuing bts 0 resend-system-information
command. Also, there's no decoding of rest octets ATM. It should be possible to detect failure by comparing rest octets as hex strings for example but it would require much deeper understanding of TTCN than I have right now.
- % Done changed from 10 to 20
Gerrit 4110 & 4160 were sent for review.
Note: those are for OsmoBSC - not sure if this should be backported to OpenBSC too.
The 4160 were tested with 16 UARFCN-SC combinations which correctly result in 2 SI2q. Those SI2q were properly sent to BTS which properly rotated between them when scheduling SI transmissions. However, upon reception of 2nd SI2q, the 1st one was overwritten as well which means only last SI2q is always scheduled. The investigation is still on-going.
Once it's fixed, we can proceed with resend-system-information tests.
- % Done changed from 20 to 50
Gerrit 4196 together with 4160 fixes the issue for uarfcns.
- Status changed from Stalled to In Progress
- % Done changed from 50 to 90
With gerrit 4199 resend works as expected for both uarfcn and earfcn.
- Priority changed from Normal to High
- Project changed from OpenBSC to OsmoBSC
- Status changed from In Progress to Resolved
- % Done changed from 90 to 100
Works with latest OsmoBSC.
- Status changed from Resolved to Closed
Also available in: Atom
PDF