Xalyo Systems XS-155 » History » Revision 4
Revision 3 (laforge, 02/20/2022 03:54 PM) → Revision 4/6 (laforge, 02/20/2022 04:00 PM)
h1. Xalyo Systems XS-155
This is a four-port STM-1 interface card by Xalyo Systems. It is based around the Wintegra processor.
The card is in a mezzanine carrier format, but using an adapter such as the XS-PCIE, it can be used in a normal PCIe slot.
h2. XS-155
The board design seems to consist of the following three major parts:
* Wintegra WinPath WIN787FPC-200B1 network processor (attachment:WIN787.pdf)
* PMC S/UNI 155 TETRA PM-5351-BGI _Quad 155 Mbit/s ATM and Packet Over SONET Physical Layer Device_ (attachment:PM5351.pdf)
* Tundra PowerspanII CA91L8269B-100CLY _Multi-port PCI bus switch_ (attachment:CA91L8260B-100CEV.pdf)
{{thumbnail(Xalyo_XS-155_bottom_in_pcie_carrier.jpg)}}
h2. XS-PCIE
This is a carrier board for the mezzanine form factor of the XS-155. It contains a PLX PEX8112 PCI to PCIe bridge (attachment:PEX8112.pdf), so that the carrie board can be plugged in a modern PCIe slot.
{{thumbnail(Xalyo_XS-PCIE_bottom.jpg)}}