LOEWE MultiTel-D » History » Version 2
manawyrm, 10/04/2023 10:07 PM
1 | 1 | manawyrm | h1. LOEWE MultiTel-D |
---|---|---|---|
2 | |||
3 | *Warning!* MultiTel-D devices contain a +Lithium backup battery+ , which will leak catastrophically and "destroy the entire device":https://pbs.twimg.com/media/FN639CSUYAAw0fb.jpg:large. |
||
4 | The battery is contained on the SRAM module, which can be removed without tools by unclipping the top cover, removing the holding bracket and then just unplugging the module. |
||
5 | |||
6 | 2 | manawyrm | {{thumbnail(IMG_8434.jpg)}} {{thumbnail(IMG_8438.jpg)}} |
7 | |||
8 | 1 | manawyrm | h2. Information |
9 | |||
10 | 2 | manawyrm | "Users Manual":https://osmocom.org/attachments/download/6958/MultiTel-D_20Bedienungsanleitung.pdf |
11 | "Service Manual":https://osmocom.org/attachments/download/6959/loewe_multitel-p.pdf (Schematics, PCB layout, Pinouts) |
||
12 | 1 | manawyrm | |
13 | 2 | manawyrm | h2. Features |
14 | |||
15 | - BTX/videotex terminal |
||
16 | - 80-character ASCII terminal mode (with ANSI-sequence support) |
||
17 | - external RS232 for faster modem, ISDN TA, direct PC connection |
||
18 | - DB25/parallel port printer interface |
||
19 | - black/white CRT |
||
20 | |||
21 | h2. Battery replacement |
||
22 | |||
23 | The SRAM backup battery (used for configuration, bookmarks, macro, etc. storage) can be replaced with a CR2032 coin cell battery. |
||
24 | |||
25 | A Q&J CR2032-BS-6-1 holder (LCSC #C70377) seems to fit pretty well: |
||
26 | |||
27 | {{thumbnail(IMG_8505 (1).JPG)}} {{thumbnail(IMG_8510.jpg)}} |
||
28 | |||
29 | h2. External modem/ISDN TA interface |
||
30 | |||
31 | RS232 (V.24) port on the back can be used to connect via modems with up to 9600 baud. |
||
32 | An ISDN TA can also be used. ELSA MicroLink ISDN was used successfully: |
||
33 | |||
34 | {{thumbnail(IMG_8522.jpg)}} {{thumbnail(IMG_8524.jpg)}} {{thumbnail(IMG_8529.jpg)}} |