osmo-sdr/firmware/README @ master
1 |
|
---|---|
2 |
In order to build the firmware, you need to clone at91lib from this |
3 |
repository: git://git.gnumonks.org/at91lib.git |
4 |
|
5 |
You need to put the at91lib and osmo-sdr into the same parent directory |
6 |
or adjust the paths in sdr-test-project/Makefile to match your layout. |
7 |
|
8 |
There are two independent progams you can build: |
9 |
|
10 |
1) usb-dfu-project |
11 |
This is the bootloader that we flash into the DFU partition |
12 |
at the start of the flash |
13 |
|
14 |
2) osmosdr-project |
15 |
This is the actual OsmoSDR firmware. There are two builds: |
16 |
|
17 |
a) smo-sdr-test-osmo-sdr-at91sam3u4-dfu.bin |
18 |
This is the image that you can flash into the DFU partition |
19 |
using DFU itself |
20 |
|
21 |
b) smo-sdr-test-osmo-sdr-at91sam3u4-flash.bin |
22 |
This is a self-contained program that you can flash to the |
23 |
beginning of the flash (in case you don't want to use DFU) |
- « Previous
- 1
- 2
- Next »