Project

General

Profile

Download (822 Bytes) Statistics
| Branch: | Tag: | Revision:
1 820a6436 Harald Welte
2
In order to build the firmware, you need to clone at91lib from this
3
repository: git://git.gnumonks.org/at91lib.git
4
5
You need to put the at91lib and osmo-sdr into the same parent directory
6
or adjust the paths in sdr-test-project/Makefile to match your layout.
7
8 ad240d9d Harald Welte
There are two independent progams you can build:
9
10
1) usb-dfu-project
11
   This is the bootloader that we flash into the DFU partition
12
   at the start of the flash
13
14
2) osmosdr-project
15
   This is the actual OsmoSDR firmware.  There are two builds:
16
17
   a) smo-sdr-test-osmo-sdr-at91sam3u4-dfu.bin
18
      This is the image that you can flash into the DFU partition
19
      using DFU itself
20
21
   b) smo-sdr-test-osmo-sdr-at91sam3u4-flash.bin
22
      This is a self-contained program that you can flash to the
23
      beginning of the flash (in case you don't want to use DFU)
Add picture from clipboard (Maximum size: 48.8 MB)