Meas web » History » Revision 5
Revision 4 (Anonymous, 02/19/2016 10:48 PM) → Revision 5/8 (Anonymous, 02/19/2016 10:48 PM)
== Web version of the OpenBSC meas_vis utility ==
This tool will allow you to display and browse the measurement reports of OpenBSC on a web based interface.
https://github.com/fairwaves/meas_web
How to install and configure the meas_web utlility:
Get the code:
git clone https://github.com/fairwaves/meas_web.git
Install dependencies:
1. Install websocketd:
https://github.com/joewalnes/websocketd/releases/
In this example we are going to use a 64bit version:
wget https://github.com/joewalnes/websocketd/releases/download/v0.2.11/websocketd-0.2.11_amd64.deb
sudo dpkg -i websocketd-0.2.11_amd64.deb
2. Install runit:
sudo apt-get install runit
3. Configure runit:
Copy the content of the meas_web/etc folder to your /etc folder:
cd meas_web
sudo cp -avr etc /
4. Make sure the "meas_vis" utility is compiled:
Go to the utility folder of your openbsc source:
cd openbsc/openbsc/src/utils
If you can't find a meas_vis binary, please run:
sudo apt-get install libcdk5-dev
sudo make meas_vis
Now you need to have the binary version of meas_vis in openbsc/openbsc/src/utils
Because meas_json is not yet part of the master, you need to download and compile it:
wget http://cgit.osmocom.org/openbsc/plain/openbsc/src/utils/meas_json.c?h=achemeris/meas_json
mv meas_json.c\?h\=achemeris%2Fmeas_json meas_jscn.c
5. Add the following line at the bottom of your openbsc.conf:
mncc-int
meas-feed destination 127.0.0.1 8888
