Retronetworking » OCTOI - Osmocom Community TDM over IP

h1. DIVF Dialplan

Our main yate switch (@divf.retronetworking.org) has (as of December 1st, 2023) the following philosophy of processing called/calling party numbers:

h2. Incoming calls from ISDN (Q.931) attached subscribers/PBXs

h3. PBXs within the +49-30 (or any other German area code prefix

* Convert the Calling Number to national format, if it is "unknown" (@caller_to_national@)

** this means something like 03012342111/unknown/isdn or 03012342111/unknown/unknown gets translated to 3012342111/national/isdn

* collect all the overlapped digits

* directly route calls of any type to old 4-digit short-hand codes for backwards compatibility (i.e. 2yyy, 3yyy, 4yyy, 9yyy, 9yyyy)

* convert Called Number to national or international format, as neded (@convert_called@)

** if Called Number is national format, keep it

** if Called Number is international format, keep it

** if Called Number is unknown, translate as follows

*** if it starts with 0049, strip that and change type to national

*** if it starts with 00, strip that and change type to international

*** if it starts with 0, strip that and change type to national

* route international calls to international destinations (@intl_outbound@)

** convert Calling Number from national to international (@caller_to_intl@)

* route national calls to national destinations (@natl_outbound@)

** block/drop calls to any prefixes resrved in German national diaplan (like 500/501, 701, 801, 90[1-5], ...)

** route anything to area code 30 to @berlin@

** route anything to area code 4644 to the EWSD of @jolly (via national ISUP/SS7 via TDMoIP)

* prefix-match to direct international interconnects

** 4205 gets routed to jpesak EWSD (via international ISUP/SS7 over TDMoIP)

** anything else gets routed via enumroute to "C-NET / CKTS":https://www.ckts.info/

h2. Incoming calls from C*NET/CKTS via IAX (@cnet_incoming)

In C*NET, all calls routed via their enum / IAX2 are using international digits like 493012342111.  I'm not sure on what guarantees we can make about the _type_, though.

* if the Called Party starts with 49 (irrespective of type), route via @natl_outbound@ on the remainder

* reject anything else, also avoid falling-back to enumroute so we don't create loop routes from C*NET to C*NET.

h2. Incoming calls via international ISUP/SS7 links (@ss7_incoming_intl@)

* reject any incoming calls that do not have an _international_ Calling Party 

* reject any incoming calls that do not h ave an _international_ Called Party

* if it starts with 49 and includes the "complete" digit (F), strip the 49 prefix and route via @natl_outbound@ (see above)

h2. Incoming calls via national ISUP/SS7 links (@ss7_incoming_natl@)

* route calls to _international_ Called Party via @intl_outbound@ (see above)

* route calls to _national_ Called Party that end in a signalling complete digit (F) via @natl_outbound@ (see above)