Project

General

Profile

Actions

Wiki » History » Revision 11

« Previous | Revision 11/14 (diff) | Next »
laforge, 03/23/2021 07:00 PM
update to v3


M.2 (NGFF) WWAN modem USB breakout board

This is a small break-out board for M.2 (NGFF) type cellular / WWAN modems.

It allows you to insert a M.2 modem from any vendor, and it will provide you with:

  • microUSB-B (3.0) socket for connection to a USB Host (like your PC/Laptop or Embedded System)
  • 5V DC input for power supply (USB supply usually insufficient for current peaks of a modem)
  • all unused m.2 pins on a 2.54mm break-out header
  • 2x SIM card slot for a 2FF-sized SIM, USIM or RUIM cards (dual-SIM)
  • socket for the PCIe lane on the m.2 connector; allows you to connect the board to a PCIe bus/port of a computer by means of a PCIe slot adapter (not included)

Particularly the break-out header is useful to get access to various signals exported in a non-standard fashion by some modem models, such as digital audio PCM.

Picture of assembled board

v3 pcba

Design Files, Schematics, Component Placement

The design files can be found in the ngff-breakout directory of the osmo-small-hardware git repository. See http://git.osmocom.org/osmo-small-hardware/tree/ngff-breakout

v3 schematics

Where to buy

Open Source Hardware

The general idea of Open Hardware projects is that anyone is allowed to build the design. So feel free to take the design files and build it yourself, either modified or unmodified. Please make sure you always
  • attribute the original author (Attribution)
  • release any changes to the design files under the same terms (Share Alike)

Fully assembled kits for purchase

If you would like to buy a fully-assembled version of this board, including all required accessories, you are able to order it from the sysmocom webshop

The sysmocom data sheet includes a list of all included accessories.

Further reading

Commercial Support

Commercial support as well as development, system integration and training services for this project are available from sysmocom

Updated by laforge over 3 years ago · 11 revisions

Add picture from clipboard (Maximum size: 48.8 MB)