Actions
SIU 02 Command Line Interface » History » Revision 1
Revision 1/4
| Next »
laforge, 07/04/2020 02:19 PM
SIU 02 Command Line Interface¶
Software/Firmware versions¶
OSmon> rev ------------------- OSE modules ------------------------------------------ oam.chk Operation & Maintenance R1M01 secmgrr.chk Security Manager R1A68 inetr.chk MLPPP Daemon R1G08 ltp.chk Local Terminal Port R1N01 snc.chk Synchronization R1M02 pd.chk Packet Distributor R1G02 cesopsn_pwr.chk Circuit Emulation Service R1H07 hdlc_pwr.chk HDLC Pseudo-Wire Emulation R1G02 p_relayr.chk Packet Relay R1G02 profiler.chk System Profiler R1G03 hwtest.chk Hardware Tester R1G08 lcf_cp.chk Local Connectivity Function R1C01 bsp.drv Board Support Package R1L04 bootstrap.chk Bootstrap R1K_2 loader.drv Software Loader R1A37 np_init_app.drv APP3K Setup R1N01 linuxload.drv Linux Loader R1N01 ------------------- Firmware modules ------------------------------------- PBOOT CXC 112 3777/1 R2B02 NP_INIT_T2.OSE CXC 173 3983/2 R3A01 FPGA - 0x2275 ------------------- Software archives ------------------------------------ Primary: OSE CXP102169_1 R1S05 Linux - R1S05 Backup: OSE CXP102169_1 R1S05 ------------------- Active software -------------------------------------- OSE Primary Linux Primary
Synchronization / Clock Source¶
OSmon> getMOAttribute STN=0,Synchronization=0 STN=0,Synchronization=0; instanceId= 0; STN=0,Synchronization=0; TS_STN_SynchStatus= synchronized; STN=0,Synchronization=0; TS_UsedTimeServer= ; STN=0,Synchronization=0; calibrationExpireDate= 20150829; STN=0,Synchronization=0; calibrationStatus= CAL_NO_CONNECTION; STN=0,Synchronization=0; synchType= notDefined; STN=0,Synchronization=0; DSCP_Synchronization= 0; STN=0,Synchronization=0; depIP_Interface= ; STN=0,Synchronization=0; usedSynchSource= ;
E1 interfaces¶
they must be created with
OSmon> starttransaction trans1 OperationSucceeded OSmon> createMO trans1 STN=0,E1T1Interface=0 OperationSucceeded
OSmon> getmoattribute trans1 STN=0,E1T1Interface=0 STN=0,E1T1Interface=0; instanceId= 0; STN=0,E1T1Interface=0; operationalState= disabled; STN=0,E1T1Interface=0; type= E1; STN=0,E1T1Interface=0; transmitClockSource= localTiming; STN=0,E1T1Interface=0; receiveClockSource= notUsed; STN=0,E1T1Interface=0; loopbackMode= off; STN=0,E1T1Interface=0; loopbackStatus= off; STN=0,E1T1Interface=0; loopbackRemainingTime= 0; STN=0,E1T1Interface=0; fdlPerformanceReports= disabled;
Updated by laforge almost 4 years ago · 1 revisions