RBS6402 Provisioning » History » Version 3
daniel, 08/15/2022 05:22 PM
1 | 1 | lynxis | h1. RBS6402 Provisioning |
---|---|---|---|
2 | |||
3 | The RBS6402 has 3 different provisioning |
||
4 | |||
5 | * generic |
||
6 | * standalone |
||
7 | * warehouse (seems to be quality assurance) |
||
8 | |||
9 | h3. How the provisioning works |
||
10 | |||
11 | The generic & standalone provisioning are quite similar. Both can be used with open5gs (or other core networks) |
||
12 | and do: |
||
13 | |||
14 | # get trusted CA (root CA) |
||
15 | # get own server certificate |
||
16 | # download & apply firmware upgrade |
||
17 | # apply configuration (netconf) |
||
18 | # get current time & date (e.g. ntp) |
||
19 | # get S1AP link (only if the cell is unlocked in netconf) |
||
20 | |||
21 | |||
22 | h3. Difference between generic and standalone provisioning |
||
23 | |||
24 | The standalone provisioning must be configured via the provisioning webui (interactive) and uses a ssh-ca as authentication. |
||
25 | Standalone can only use certificates downloaded via sftp and not via SCEP/CEP (Simple Certificate Enrollment Protocol). |
||
26 | While the generic provisioning will be configured via https without any user interaction and uses LDAP as authentication. |
||
27 | 2 | lynxis | Also both use different kind of provisioning files. |
28 | 1 | lynxis | |
29 | h3. How to debug configuration or provisioning problems? |
||
30 | |||
31 | - The rbs6402 has a log file which is persistence between reboot and factory resets. It's accessible via the provisioning webui or if you use a known-good provisioning and download it via sftp. |
||
32 | - The rbs6402 will retry it's provisioning every 15 minutes, however there are certain error which it won't reset on it's own. |
||
33 | - Restart via power will work in 95% of the cases to restart the provisioning. |
||
34 | - Factory reset via the button will always work. |
||
35 | - create a pcap via tcpdump/wireshark to see the different stages. |
||
36 | |||
37 | 3 | daniel | h3. Restart provisioning from ssh |
38 | |||
39 | If the RBS6402 is (at least partly) provisioned you can connect to it through ssh: |
||
40 | <pre> |
||
41 | $ ssh 10.23.24.117 -l osmocom -p9830 |
||
42 | # Password is osmocom123 |
||
43 | >ManagedElement=foo,Equipment=1,RbsUnit=1,resetToFactory |
||
44 | </pre> |
||
45 | |||
46 | 1 | lynxis | h3. known issues |
47 | |||
48 | * The rbs6402 2018Q1 have sometimes problems if you configure 2x IPs within the same IP network (Host=1, Host=2). The provisioning might hang when retrieving the current time even ntp traffic looks fine. |
||
49 | |||
50 | h3. provisioning webui |
||
51 | |||
52 | The rbs6402 will open a webui when both ethernet interfaces are connected (rj45 and sfp) and have a link. The webui can also be use to watch the provisioning progress. |
||
53 | * IP: 10.1.1.11/24 |
||
54 | * http://webui:admin@10.1.1.11/ |