Accelerate3g5 -- unicornteam » History » Revision 18
Revision 17 (Alin, 04/11/2017 09:41 AM) → Revision 18/24 (Alin, 04/11/2017 10:05 AM)
h1. Accelerate3g5 -- unicornteam
Journal
2017/03/15 -- Received the package of nano3G.
!C7aK_6IVAAALB5Z.jpg!
2017/04/10
h2. Building from source
* PC:Ubuntu16.04
* HardWare:ip.access nano3G
* SoftWare:Osmocom
!C7aK_5_U0AAN1Co.jpg!
h3. 1.1 Install cross-compilation environment
<pre>
sudo apt-get update
sudo apt-get install libtool shtool autoconf git-core pkg-config make gcc build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 libncurses5-dbg libusb-0.1-4 libpcsclite1 libccid pcscd libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev libpcsclite-dev
sudo ldconfig
mkdir osm
cd osm
mkdir build install src
wget http://bb.osmocom.org/trac/raw-attachment/wiki/GnuArmToolchain/gnu-arm-build.3.sh
cd src
wget http://ftp.gnu.org/gnu/gcc/gcc-4.8.2/gcc-4.8.2.tar.bz2
wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2
wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz
cd ..
chmod +x gnu-arm-build.3.sh
sudo bash gnu-arm-build.3.sh
</pre>
h3. 1.2 Add Cross compiler environment
<pre>
cd install/bin
pwd
vi ~/./.bashrc
export PATH=$PATH:/home/$username(change this to your name)/osm/install/bin
#save and quit
cd ../../
source ~/.bashrc
</pre>
h3. 0x02 build CalypsoBTS
h3. 2.1 Build libosmo-dsp
<pre>
git clone git://git.osmocom.org/libosmo-dsp.git
cd libosmo-dsp/
autoreconf -i
./configure
make
sudo make install
cd ..
</pre>
h3. 2.2 Build osmocom-bb
<pre>
git clone git://git.osmocom.org/osmocom-bb.git trx
cd trx/
git checkout jolly/testing
cd src/
# It needs TX support
# Just uncomment 'CFLAGS += -DCONFIG_TX_ENABLE' in target/firmware/Makefile
# And make with transceiver support
make HOST_layer23_CONFARGS=--enable-transceiver
</pre>
h3. 2.3 Install dependency package
<pre>
sudo apt-get install sqlite3 libdbi-dev libdbd-sqlite3 libsctp-dev
</pre>
h3. 2.4 Build Ortp
<pre>
wget http://download.savannah.gnu.org/releases/linphone/ortp/sources/ortp-0.22.0.tar.gz
tar -xvf ortp-0.22.0.tar.gz
cd ortp-0.22.0/
./configure
make
sudo make install
sudo ldconfig
cd ..
</pre>
h3. 2.5 Build libosmo-abis
<pre>
git clone git://git.osmocom.org/libosmo-abis.git
cd libosmo-abis
autoreconf -i
./configure
make
sudo make install
sudo ldconfig
cd ..
</pre>
h3. 2.6 Build libosmo-netif
<pre>
git clone git://git.osmocom.org/libosmo-netif.git
cd libosmo-netif/
autoreconf -i
./configure
make
sudo make install
sudo ldconfig
cd ..
</pre>
h3. 2.7 Build openbsc
install PCAP library frist
<pre>
apt-cache search PCAP
sudo pat-get install libpcap-dev libpcap0.8 libpcap0.8-dbg libpcap0.8-dev
sudo ldconfig
git clone git://git.osmocom.org/openbsc.git
cd openbsc/openbsc/
autoreconf -i
./configure
make
sudo make install
cd ../..
</pre>
h3. 2.8 Build osmo-bts
<pre>
git clone git://git.osmocom.org/osmo-bts.git
cd osmo-bts
autoreconf -i
./configure --enable-trx
make
sudo make install
cd ..
</pre>
h3. 2.9 Create configuration folder for OpenBSC
<pre>
# Create the configuration folder if it isn't exist yet
mkdir ~/.osmocom
cd ~/.osmocom
touch ~/.osmocom/open-bsc.cfg
touch ~/.osmocom/osmo-bts.cfg
</pre>
h3. 0x03 Build Cellular Infrastructure
h3. 3.1 Clone
<pre>
git clone git://git.osmocom.org/libosmocore
git clone git://git.osmocom.org/libosmo-abis
git clone git://git.osmocom.org/openbsc
git clone git://git.osmocom.org/libosmo-netif
git clone git://git.osmocom.org/libosmo-sccp
git clone git://git.osmocom.org/libsmpp34
git clone git://git.osmocom.org/openggsn
</pre>
h3. 3.2 Download and run build script
<pre>
wget https://osmocom.org/attachments/download/2438/build_2G.sh
chmod 777 build_2G.sh
sudo bash build_2G.sh
</pre>
h3. Run BTS
Terminal 1:
<pre>
osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM
</pre>
Terminal 2:
<pre>
telnet localhost 4242
</pre>
!2017-04.png!
<pre>
OpenBSC> show version
OpenBSC 0.15.0.726-ca27 (OpenBSC).
Copyright (C) 2008-2016 Harald Welte, Holger Freyther
Contributions by Daniel Willmann, Jan Lübbe, Stefan Schmidt
Dieter Spaar, Andreas Eversberg, Sylvain Munaut, Neels Hofmeyr
License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
</pre>
2017/04/11
h2. Configuring the ip.access nano3G
!network.jpg!
h3. PC
IP:192.168.31.147 (With WiFi)
h3. Route
IP:192.168.31.1
h3. 3G Access Point
IP:unkonw
<pre>
cd openbsc/openbsc/src/ipaccess
#or
cd openbsc/openbsc/build-2G/src/ipaccess
sudo ./abisip-find
</pre>
!ipfind.png!
<pre>
telnet 3G Access Point's IP 8090
</pre>
!telnet.png!
<pre>
ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 root@192.168.31.136
password:newsys
</pre>
!Snip20170411_2.png!
<pre>
init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-config --help
ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY
Usage: ipaccess-config IP_OF_BTS
Commands for writing to the BTS:
-u --unit-id UNIT_ID Set the Unit ID of the BTS
-o --oml-ip IP Set primary OML IP (IP of your BSC)
-i --ip-address IP/MASK Set static IP address + netmask of BTS
-g --ip-gateway IP Set static IP gateway of BTS
-r --restart Restart the BTS (after other operations)
-n --nvram-flags FLAGS/MASK Set NVRAM attributes
-S --nvattr-set FLAG Set one additional NVRAM attribute
-U --nvattr-unset FLAG Set one additional NVRAM attribute
-l --listen TESTNR Perform specified test number
-L --Listen TEST_NAME Perform specified test
-s --stream-id ID Set the IPA Stream Identifier for OML
-d --software FIRMWARE Download firmware into BTS
Miscellaneous commands:
-h --help this text
-H --HELP Print parameter details.
-f --firmware FIRMWARE Provide firmware information
-w --write-firmware This will dump the firmware parts to the filesystem. Use with -f.
-p --loop Loop the tests executed with the --listen command.
</pre>
<pre>
init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-proxy --help
Usage: ipaccess-proxy [options]
ipaccess-proxy is a proxy BTS.
-h --help. This help text.
-l --listen IP. The ip to listen to.
-b --bsc IP. The BSC IP address.
-g --gprs IP. Take GPRS NS from that IP.
-s --disable-color. Disable the color inside the logging message.
-e --log-level number. Set the global loglevel.
-T --timestamp. Prefix every log message with a timestamp.
-V --version. Print the version of OpenBSC.
</pre>
h2. Femto Config
coming soon