---

IMPORTANT NOTICE: This page contains information about a legacy version of the Osmocom software. This legacy version is no longer maintained. If you use it, don't be surprised if it doesn't work. It was your choice to ignore man-years worth of developments, improvements and fixes. Please migrate to the active/supported software (Osmocom CNI, consisting of OsmoBSC, OsmoMSC, OsmoHLR, OsmoSTP, OsmoMGW - a NITB style setup is described at Osmocom_Network_In_The_Box).

---

DISCLAIMER¶

This page is user-contributed information, and not official documentation by the Osmocom project. It might be outdated or inaccurate.
Please help by improving this document, or reporting any issues to the relevant mailing list.

Accelerate3g5 -- Unicorn Team¶

Journal

2017/03/15 -- Received the package of nano3G.

2017/04/10

Building from source

• PC：Ubuntu16.04
• HardWare：ip.access nano3G
• SoftWare：Osmocom

1.1 Install cross-compilation environment¶

sudo apt-get update

sudo apt-get install libtool shtool autoconf git-core pkg-config make gcc build-essential libgmp3-dev libmpfr-dev libx11-6 libx11-dev texinfo flex bison libncurses5 libncurses5-dbg libusb-0.1-4 libpcsclite1 libccid pcscd libncurses5-dev libncursesw5 libncursesw5-dbg libncursesw5-dev zlibc zlib1g-dev libmpfr4 libmpc-dev libpcsclite-dev 
sudo ldconfig

mkdir osm
cd osm
mkdir build install src
wget http://bb.osmocom.org/trac/raw-attachment/wiki/GnuArmToolchain/gnu-arm-build.3.sh
cd src
wget http://ftp.gnu.org/gnu/gcc/gcc-4.8.2/gcc-4.8.2.tar.bz2
wget http://ftp.gnu.org/gnu/binutils/binutils-2.21.1a.tar.bz2
wget ftp://sources.redhat.com/pub/newlib/newlib-1.19.0.tar.gz

cd ..
chmod +x gnu-arm-build.3.sh
sudo bash gnu-arm-build.3.sh

1.2 Add Cross compiler environment¶

cd install/bin
pwd

vi ~/./.bashrc
export PATH=$PATH:/home/$username(change this to your name)/osm/install/bin

#save and quit
cd ../../
source ~/.bashrc

0x02 build CalypsoBTS¶

2.1 Build libosmo-dsp¶

git clone https://gitea.osmocom.org/sdr/libosmo-dsp
cd libosmo-dsp/
autoreconf -i
./configure
make
sudo make install
cd ..

2.2 Build osmocom-bb¶

git clone https://gitea.osmocom.org/phone-side/osmocom-bb trx
cd trx/
git checkout jolly/testing
cd src/

# It needs TX support
# Just uncomment 'CFLAGS += -DCONFIG_TX_ENABLE' in target/firmware/Makefile

# And make with transceiver support
make HOST_layer23_CONFARGS=--enable-transceiver

2.3 Install dependency package¶

sudo apt-get install sqlite3 libdbi-dev libdbd-sqlite3 libsctp-dev

2.4 Build Ortp¶

wget http://download.savannah.gnu.org/releases/linphone/ortp/sources/ortp-0.22.0.tar.gz
tar -xvf ortp-0.22.0.tar.gz
cd ortp-0.22.0/
./configure
make
sudo make install
sudo ldconfig
cd ..

2.5 Build libosmo-abis¶

git clone https://gitea.osmocom.org/osmocom/libosmo-abis
cd libosmo-abis
autoreconf -i
./configure
make
sudo make install
sudo ldconfig
cd ..

2.6 Build libosmo-netif¶

git clone https://gitea.osmocom.org/osmocom/libosmo-netif
cd libosmo-netif/
autoreconf -i
./configure
make
sudo make install
sudo ldconfig
cd ..

2.7 Build openbsc¶

install PCAP library frist

apt-cache search PCAP
sudo pat-get install libpcap-dev libpcap0.8 libpcap0.8-dbg libpcap0.8-dev
sudo ldconfig

git clone https://gitea.osmocom.org/cellular-infrastructure/openbsc
cd openbsc/openbsc/
autoreconf -i
./configure
make
sudo make install
cd ../..

2.8 Build osmo-bts¶

git clone https://gitea.osmocom.org/cellular-infrastructure/osmo-bts
cd osmo-bts
autoreconf -i
./configure --enable-trx
make
sudo make install
cd ..

2.9 Create configuration folder for OpenBSC¶

# Create the configuration folder if it isn't exist yet
mkdir ~/.osmocom
cd ~/.osmocom
touch ~/.osmocom/open-bsc.cfg
touch ~/.osmocom/osmo-bts.cfg

0x03 Build Cellular Infrastructure¶

3.1 Clone¶

git clone https://git.osmocom.org/osmocom/libosmocore
git clone https://git.osmocom.org/osmocom/libosmo-abis
git clone https://git.osmocom.org/osmocom/openbsc
git clone https://git.osmocom.org/osmocom/libosmo-netif
git clone https://git.osmocom.org/osmocom/libosmo-sccp
git clone https://git.osmocom.org/cellular-infrastructure/libsmpp34
git clone https://git.osmocom.org/cellular-infrastructure/openggsn

3.2 Download and run build script¶

wget https://osmocom.org/attachments/download/2438/build_2G.sh
chmod 777  build_2G.sh
sudo bash build_2G.sh

h3. Run BTS

Terminal 1：

osmo-nitb -c ~/.osmocom/open-bsc.cfg -l ~/.osmocom/hlr.sqlite3 -P -C --debug=DRLL:DCC:DMM:DRR:DRSL:DNM

Terminal 2：

telnet localhost 4242

OpenBSC> show version
OpenBSC 0.15.0.726-ca27 (OpenBSC).
Copyright (C) 2008-2016 Harald Welte, Holger Freyther
Contributions by Daniel Willmann, Jan Lübbe, Stefan Schmidt
Dieter Spaar, Andreas Eversberg, Sylvain Munaut, Neels Hofmeyr

License AGPLv3+: GNU AGPL version 3 or later <http://gnu.org/licenses/agpl-3.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

2017/04/11

Configuring the ip.access nano3G¶

PC¶

IP：192.168.31.147 (With WiFi)

Route¶

IP:192.168.31.1

3G Access Point¶

IP:unkonw

cd openbsc/openbsc/src/ipaccess
#or
cd openbsc/openbsc/build-2G/src/ipaccess

sudo ./abisip-find 

telnet 3G Access Point's IP 8090

ssh -oKexAlgorithms=+diffie-hellman-group1-sha1 root@192.168.31.136
password:newsys

init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-config --help
ipaccess-config (C) 2009-2010 by Harald Welte and others
This is FREE SOFTWARE with ABSOLUTELY NO WARRANTY

Usage: ipaccess-config IP_OF_BTS
Commands for writing to the BTS:
  -u --unit-id UNIT_ID      Set the Unit ID of the BTS
  -o --oml-ip IP        Set primary OML IP (IP of your BSC)
  -i --ip-address IP/MASK   Set static IP address + netmask of BTS
  -g --ip-gateway IP        Set static IP gateway of BTS
  -r --restart          Restart the BTS (after other operations)
  -n --nvram-flags FLAGS/MASK   Set NVRAM attributes
  -S --nvattr-set FLAG  Set one additional NVRAM attribute
  -U --nvattr-unset FLAG    Set one additional NVRAM attribute
  -l --listen TESTNR        Perform specified test number
  -L --Listen TEST_NAME     Perform specified test
  -s --stream-id ID     Set the IPA Stream Identifier for OML
  -d --software FIRMWARE    Download firmware into BTS

Miscellaneous commands:
  -h --help         this text
  -H --HELP         Print parameter details.
  -f --firmware FIRMWARE    Provide firmware information
  -w --write-firmware       This will dump the firmware parts to the filesystem. Use with -f.
  -p --loop         Loop the tests executed with the --listen command.

init3@0xroot:~/osm/openbsc/openbsc/src/ipaccess$ ./ipaccess-proxy --help
Usage: ipaccess-proxy [options]
 ipaccess-proxy is a proxy BTS.
 -h --help. This help text.
 -l --listen IP. The ip to listen to.
 -b --bsc IP. The BSC IP address.
 -g --gprs IP. Take GPRS NS from that IP.

 -s --disable-color. Disable the color inside the logging message.
 -e --log-level number. Set the global loglevel.
 -T --timestamp. Prefix every log message with a timestamp.
 -V --version. Print the version of OpenBSC.

Femto Config¶

2017/06/06:
phone call work fine.
SMS work fine.
Internet Date not work -.-!

2017/06/20:
Internet Date work fine :)

Clone and Build from script¶

wget https://osmocom.org/attachments/download/2726/3G-config-example.tar
tar zxvf 3G-config-example.tar
cd 3G-config-example/build
./clone_and_build_osmocom_3g.sh
sudo apt-get install rxvt-unicode

add subscribers with auth keys in the HLR database:
https://osmocom.org/projects/cellular-infrastructure/wiki/Getting_Started_with_3G

https://osmocom.org/projects/cellular-infrastructure/wiki/Configuring_the_ipaccess_nano3G

Demo¶

2017/07/06:

[[https://youtu.be/PFH_-vID3AA]]