Actions
Feature #6417
openCRC4 configuration
Status:
New
Priority:
Normal
Assignee:
-
Category:
gateware
Target version:
-
Start date:
03/22/2024
Due date:
% Done:
0%
Spec Reference:
Description
Even if the icE1usb support CRC4 enabled or disabled the osmo-e1d process need CRC4 on Rx to align.
I suggest that we do CRC4 check configurable.
On a Cisco modem pool you can disable CRC4 in the E1 controller section:
controller E1 2/1 framing NO-CRC4 pri-group timeslots 1-31 description Towards Kanin-Q921_4
Maybe we can do the same in the line section in the config file, something like this:
e1d interface 0 icE1usb usb-serial xxxxxxxxxxxx line 0 framing no-crc4 mode e1oip
// Peter
Updated by tnt about 1 month ago
- Category changed from firmware to gateware
The gateware currently has no such support CRC4 is always used for multi frame alignement, so it needs to be added there first.
Actions