Actions
Support #4512
closeddescribe the physical pySim test setup
Start date:
04/26/2020
Due date:
% Done:
100%
Spec Reference:
Description
Please create a wiki page here in the redmine project that describes the physical pySim test setup that we have at the sysmocom office,
i.e.
i.e.
- what kind of readers + qty we have
- what kind of cards are inserted
- where the actual test code + data is found in the pysim respository
- that it is executed via a jenkins job (which? incldue link)
- that it is used for verification of patches pushed into gerrit
Feel free to ask / reassign to dexter once the basics are there and you are running out of details you know.
Updated by roh almost 4 years ago
i added a basic page on https://osmocom.org/projects/pysim/wiki/TestRig
and a link on https://osmocom.org/projects/pysim/wiki/Wiki#Testing
please check if you see any details i should elaborate on more, or if i should draw up some pictures or add photos (i have some but they are not good, need to make new ones)
there is also a jenkins job https://jenkins.osmocom.org/jenkins/job/master-sysmo-usim-tool/ which i currently refrained to link there, since it doesn't share any code but only the hardware setup and would confuse some users
Updated by roh almost 4 years ago
- Status changed from New to In Progress
- % Done changed from 0 to 50
Updated by laforge almost 4 years ago
- Status changed from In Progress to Resolved
- % Done changed from 50 to 100
Actions