Support #3924
closed
There is no way to run both mobile and ccch_scan at the same time. A possible solution is to use two separate phones, run two osmocon processes on different UNIX-sockets, for example:
$ cd osmocom-bb/src/
$ host/osmocon/osmocon -p /dev/ttyUSB0 -s /tmp/osmocom_l2.0 ...
$ cd osmocom-bb/src/
$ host/osmocon/osmocon -p /dev/ttyUSB1 -s /tmp/osmocom_l2.1 ...
OK,That's right.
Does the mobile app work only on the master branch?
For example in the burst_ind branch it says no SIM inserted...
Does the mobile app work only on the master branch?
For example in the burst_ind branch it says no SIM inserted...
Because the burst_ind branch contains a hack for sniffing, which breaks the regular operation (e.g. power measurement task is disabled). Also, there is a huge commit-difference between master and the burst_ind, so the answer is no. You need to use master for mobile (both firmware and host software, please don't mix!).
Thanks...
Sorry, I don't know how to close this issue.
Status does not change...
- Status changed from New to Closed
Also available in: Atom
PDF