Retronetworking » BBS-Revival

h1. Cyclades TS2000

This is a RS232 "terminal server" providing IP based access to 32 serial ports

h2. Pictures

{{thumbnail(Cyclades_T2000_1.jpg)}}

{{thumbnail(Cyclades_TS2000_2.jpg)}}

{{thumbnail(Cyclades_TS2000_3.jpg)}}

{{thumbnail(Cyclades_TS2000_4.jpg)}}

{{thumbnail(Cyclades_TS2000_5.jpg)}}

{{thumbnail(Cyclades_TS2000_6.jpg)}}

h3. Linux based OS

h4. default user/password

The default @root@ password after factory reset is @tslinux@

The default baud rate on the console port is 9600 bps, but I changed it to 115200.

h4. bootlog

<pre>

Booting from Alternate Boot 1.9.8  (Oct/30/02)

Cyclades Corporation

Testing RAM .............................. FULL TEST

    This test takes a few seconds.

    Press <ESC> if you want to cancel it.

    Memory detected: 65536 Kbytes

    Test in progress: 65536 Kbytes OK

Testing FLASH ............................ OK

    Flash detected: 4096 Kbytes

Testing Flash [Configuration] ............ OK

Testing Flash [Op Code] .................. OK   

Interface Cards Detected ................. OK

    32-UART ports detected

Testing Ethernet ......................... NOK

Testing Real Time Clock .................. OK

Testing Router Serial Number.............. OK

    Router ID is 2EF590070000F8

Hardware boot.

Entry Point = 0x00210020

loaded at:     00210020 0021C3A8

relocated to:  00200020 0020C3A8

board data at: 002062C8 002064B8

relocated to:  001FF120 001FF310

zimage at:     00217000 0028021B

relocated to:  03C7E000 03CE721B

initrd at:     0028021B 00595A91

relocated to:  03CE9000 03FFE876

avail ram:     00281000 03CE9000

Linux/PPC load: root=/dev/ram ramdisk=0x00007000

Uncompressing Linux...done.

Now booting the kernel

Linux version 2.2.14 (root@dell) (gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)) #2 Thu Sep 18 12:19:50 PDT 2003

Boot arguments: root=/dev/ram ramdisk=0x00007000

CPM interrupt vector 0 handler c00b2aa0 

time_init: decrementer frequency = 180000000/60

Calibrating delay loop... 47.82 BogoMIPS

Memory: 60548k available (740k kernel code, 1056k data, 32k init) [c0000000,c4000000]

Flash addr: c8004000, CPLD addr: c8002000, UART Addr: c8000000

CPLD-10 init: r1=0 ck1=ff sc1=0 i1=ff i2=ff i3=ff i4=ff s1=0 s2=0 s3=0 s4=0

FLASH disk driver initialized:  VMA c8004000 size 4096kb blocks 64

Dentry hash table entries: 8192 (order 4, 64k)

Buffer cache hash table entries: 65536 (order 6, 256k)

Page cache hash table entries: 16384 (order 4, 64k)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.2

Based upon Swansea University Computer Society NET3.039

NET4: Unix domain sockets 1.0 for Linux NET4.0.

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

TCP: Hash tables configured (ehash 65536 bhash 65536)

Initializing RT netlink socket

Starting kswapd v 1.2 

Serial driver version 4.27 with SHARE_IRQ enabled

ttyS01 at 0xc8000000 (irq = 2) is a ST16C654

ttyS02 at 0xc8000008 (irq = 2) is a ST16C654

ttyS03 at 0xc8000010 (irq = 2) is a ST16C654

ttyS04 at 0xc8000018 (irq = 2) is a ST16C654

ttyS05 at 0xc8000020 (irq = 2) is a ST16C654

ttyS06 at 0xc8000028 (irq = 2) is a ST16C654

ttyS07 at 0xc8000030 (irq = 2) is a ST16C654

ttyS08 at 0xc8000038 (irq = 2) is a ST16C654

ttyS09 at 0xc8000040 (irq = 2) is a ST16C654

ttyS10 at 0xc8000048 (irq = 2) is a ST16C654

ttyS11 at 0xc8000050 (irq = 2) is a ST16C654

ttyS12 at 0xc8000058 (irq = 2) is a ST16C654

ttyS13 at 0xc8000060 (irq = 2) is a ST16C654

ttyS14 at 0xc8000068 (irq = 2) is a ST16C654

ttyS15 at 0xc8000070 (irq = 2) is a ST16C654

ttyS16 at 0xc8000078 (irq = 2) is a ST16C654

ttyS17 at 0xc8000080 (irq = 2) is a ST16C654

ttyS18 at 0xc8000088 (irq = 2) is a ST16C654

ttyS19 at 0xc8000090 (irq = 2) is a ST16C654

ttyS20 at 0xc8000098 (irq = 2) is a ST16C654

ttyS21 at 0xc80000a0 (irq = 2) is a ST16C654

ttyS22 at 0xc80000a8 (irq = 2) is a ST16C654

ttyS23 at 0xc80000b0 (irq = 2) is a ST16C654

ttyS24 at 0xc80000b8 (irq = 2) is a ST16C654

ttyS25 at 0xc80000c0 (irq = 2) is a ST16C654

ttyS26 at 0xc80000c8 (irq = 2) is a ST16C654

ttyS27 at 0xc80000d0 (irq = 2) is a ST16C654

ttyS28 at 0xc80000d8 (irq = 2) is a ST16C654

ttyS29 at 0xc80000e0 (irq = 2) is a ST16C654

ttyS30 at 0xc80000e8 (irq = 2) is a ST16C654

ttyS31 at 0xc80000f0 (irq = 2) is a ST16C654

ttyS32 at 0xc80000f8 (irq = 2) is a ST16C654

CPM UART driver version 0.03

ttyS0 on SMC1 at 0x0280, BRG1

CPM interrupt vector 4 handler c00b2f00 

RAM disk driver initialized:  16 RAM disks of 28672K size

eth0: FEC ENET Version 0.1, 00:fec: Phy @ 0x1, type 0x20005c23

60:2e:00:4e:fec: link down

25

PPP: version 2.3.7 (demand dialling)

TCP compression code copyright 1989 Regents of the University of California

PPP line discipline registered.

SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Freeing unused kernel memory: 32k init

Restoring configuration files from Flash ... done.

SIOCSIFFLAGS: Cannot assign requested address

Machine CPLD, Ports 32

Allocated shmid : 0  at : 0x3ff00000

Max device :32  dynamic memory size : 262144

Linux version 2.2.14 (root@dell) (gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)) #2 Thu Sep 18 12:19:50 PDT 2003

Cyclades-TS2000-Linux V_1.3.8.1 (Sep/18/03)

Restoring firewall rules from /etc/network/firewall ...

Cyclades-TS

shrzuxts1 login: 

</pre>