Project

General

Profile

Cyclades TS2000 » History » Version 5

laforge, 01/03/2020 02:34 PM

1 1 laforge
h1. Cyclades TS2000
2
3
This is a RS232 "terminal server" providing IP based access to 32 serial ports
4 2 laforge
5
6
7
8
h3. Linux based OS
9
10 3 laforge
h4. default user/password
11
12 4 laforge
The default @root@ password after factory reset is @tslinux@
13 3 laforge
14 5 laforge
The default baud rate on the console port is 9600 bps, but I changed it to 115200.
15
16 2 laforge
h4. bootlog
17
18
<pre>
19
Booting from Alternate Boot 1.9.8  (Oct/30/02)
20
Cyclades Corporation
21
22
Testing RAM .............................. FULL TEST
23
    This test takes a few seconds.
24
    Press <ESC> if you want to cancel it.
25
    Memory detected: 65536 Kbytes
26
    Test in progress: 65536 Kbytes OK
27
Testing FLASH ............................ OK
28
    Flash detected: 4096 Kbytes
29
Testing Flash [Configuration] ............ OK
30
Testing Flash [Op Code] .................. OK   
31
Interface Cards Detected ................. OK
32
    32-UART ports detected
33
Testing Ethernet ......................... NOK
34
Testing Real Time Clock .................. OK
35
Testing Router Serial Number.............. OK
36
    Router ID is 2EF590070000F8
37
Hardware boot.
38
39
Entry Point = 0x00210020
40
loaded at:     00210020 0021C3A8
41
relocated to:  00200020 0020C3A8
42
board data at: 002062C8 002064B8
43
relocated to:  001FF120 001FF310
44
zimage at:     00217000 0028021B
45
relocated to:  03C7E000 03CE721B
46
initrd at:     0028021B 00595A91
47
relocated to:  03CE9000 03FFE876
48
avail ram:     00281000 03CE9000
49
50
Linux/PPC load: root=/dev/ram ramdisk=0x00007000
51
Uncompressing Linux...done.
52
Now booting the kernel
53
Linux version 2.2.14 (root@dell) (gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)) #2 Thu Sep 18 12:19:50 PDT 2003
54
Boot arguments: root=/dev/ram ramdisk=0x00007000
55
CPM interrupt vector 0 handler c00b2aa0 
56
time_init: decrementer frequency = 180000000/60
57
Calibrating delay loop... 47.82 BogoMIPS
58
Memory: 60548k available (740k kernel code, 1056k data, 32k init) [c0000000,c4000000]
59
Flash addr: c8004000, CPLD addr: c8002000, UART Addr: c8000000
60
CPLD-10 init: r1=0 ck1=ff sc1=0 i1=ff i2=ff i3=ff i4=ff s1=0 s2=0 s3=0 s4=0
61
FLASH disk driver initialized:  VMA c8004000 size 4096kb blocks 64
62
Dentry hash table entries: 8192 (order 4, 64k)
63
Buffer cache hash table entries: 65536 (order 6, 256k)
64
Page cache hash table entries: 16384 (order 4, 64k)
65
POSIX conformance testing by UNIFIX
66
Linux NET4.0 for Linux 2.2
67
Based upon Swansea University Computer Society NET3.039
68
NET4: Unix domain sockets 1.0 for Linux NET4.0.
69
NET4: Linux TCP/IP 1.0 for NET4.0
70
IP Protocols: ICMP, UDP, TCP
71
TCP: Hash tables configured (ehash 65536 bhash 65536)
72
Initializing RT netlink socket
73
Starting kswapd v 1.2 
74
Serial driver version 4.27 with SHARE_IRQ enabled
75
ttyS01 at 0xc8000000 (irq = 2) is a ST16C654
76
ttyS02 at 0xc8000008 (irq = 2) is a ST16C654
77
ttyS03 at 0xc8000010 (irq = 2) is a ST16C654
78
ttyS04 at 0xc8000018 (irq = 2) is a ST16C654
79
ttyS05 at 0xc8000020 (irq = 2) is a ST16C654
80
ttyS06 at 0xc8000028 (irq = 2) is a ST16C654
81
ttyS07 at 0xc8000030 (irq = 2) is a ST16C654
82
ttyS08 at 0xc8000038 (irq = 2) is a ST16C654
83
ttyS09 at 0xc8000040 (irq = 2) is a ST16C654
84
ttyS10 at 0xc8000048 (irq = 2) is a ST16C654
85
ttyS11 at 0xc8000050 (irq = 2) is a ST16C654
86
ttyS12 at 0xc8000058 (irq = 2) is a ST16C654
87
ttyS13 at 0xc8000060 (irq = 2) is a ST16C654
88
ttyS14 at 0xc8000068 (irq = 2) is a ST16C654
89
ttyS15 at 0xc8000070 (irq = 2) is a ST16C654
90
ttyS16 at 0xc8000078 (irq = 2) is a ST16C654
91
ttyS17 at 0xc8000080 (irq = 2) is a ST16C654
92
ttyS18 at 0xc8000088 (irq = 2) is a ST16C654
93
ttyS19 at 0xc8000090 (irq = 2) is a ST16C654
94
ttyS20 at 0xc8000098 (irq = 2) is a ST16C654
95
ttyS21 at 0xc80000a0 (irq = 2) is a ST16C654
96
ttyS22 at 0xc80000a8 (irq = 2) is a ST16C654
97
ttyS23 at 0xc80000b0 (irq = 2) is a ST16C654
98
ttyS24 at 0xc80000b8 (irq = 2) is a ST16C654
99
ttyS25 at 0xc80000c0 (irq = 2) is a ST16C654
100
ttyS26 at 0xc80000c8 (irq = 2) is a ST16C654
101
ttyS27 at 0xc80000d0 (irq = 2) is a ST16C654
102
ttyS28 at 0xc80000d8 (irq = 2) is a ST16C654
103
ttyS29 at 0xc80000e0 (irq = 2) is a ST16C654
104
ttyS30 at 0xc80000e8 (irq = 2) is a ST16C654
105
ttyS31 at 0xc80000f0 (irq = 2) is a ST16C654
106
ttyS32 at 0xc80000f8 (irq = 2) is a ST16C654
107
CPM UART driver version 0.03
108
ttyS0 on SMC1 at 0x0280, BRG1
109
CPM interrupt vector 4 handler c00b2f00 
110
RAM disk driver initialized:  16 RAM disks of 28672K size
111
eth0: FEC ENET Version 0.1, 00:fec: Phy @ 0x1, type 0x20005c23
112
60:2e:00:4e:fec: link down
113
25
114
PPP: version 2.3.7 (demand dialling)
115
TCP compression code copyright 1989 Regents of the University of California
116
PPP line discipline registered.
117
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
118
RAMDISK: Compressed image found at block 0
119
VFS: Mounted root (ext2 filesystem).
120
Freeing unused kernel memory: 32k init
121
Restoring configuration files from Flash ... done.
122
SIOCSIFFLAGS: Cannot assign requested address
123
Machine CPLD, Ports 32
124
Allocated shmid : 0  at : 0x3ff00000
125
Max device :32  dynamic memory size : 262144
126
127
Linux version 2.2.14 (root@dell) (gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)) #2 Thu Sep 18 12:19:50 PDT 2003
128
Cyclades-TS2000-Linux V_1.3.8.1 (Sep/18/03)
129
130
Restoring firewall rules from /etc/network/firewall ...
131
132
Cyclades-TS
133
134
shrzuxts1 login: 
135
</pre>
Add picture from clipboard (Maximum size: 48.8 MB)