NanoBTSInternals » History » Revision 1
Revision 1/12
| Next »
laforge, 02/19/2016 10:48 PM
'''WARNING: Opening or modifying your nanoBTS will render your warranty void and might affect regulatory approval!'''
PCB photographs=== nanoBTS 1800 ===
Debug PortThere is a serial port for debugging. This port can be accessed via one of the two TIB RJ45 jacks, but only after
a small hardware modification has been made. Please reference the following picture for details.
After soldering those two connections, the pin-out of ''TIB out'' is as follows:
- Pin 7: PPC UART Tx (3.3V)
- Pin 8: PPC UART Tx (3.3V)
- Pin 10: Ground
You can use any level shifter to get the signal up to true RS323 values, or directly connect something like a FT232.
There seems to be some kind of serial console on the device, we haven't yet figured out more details.
=== nanoBTS 900 ===
FIXME
Updated by laforge about 8 years ago · 1 revisions