Actions
BS11LMT » History » Revision 6
« Previous |
Revision 6/8
(diff)
| Next »
laforge, 02/19/2016 10:47 PM
Name changed from BS11_LMT to BS11/LMT
How to use LMT
* connect serial port of PC with J2 on BS11 using the cable that came with the BS11
* start LMT program
=== LMT rs232 connector pinout ===
If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:
{{{
The four E1 BNC connectors are above here.
(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V)
|
+ LMT
}}}
see also [[Image(BS11_Configuration:bs11_power_lmt_cabling.jpg)]]
'''J2:'''
{{{
5(GND)
|
| 3(TX)
| |
X 0 X 0
0 0 X 0
|
2(RX)
}}}
'''RS232:'''
{{{
5(GND)
|
| 3(TX)
| |
| | 2(RX)
| | |
X 0 X X 0
0 0 0 0
}}}
=== LMT v4.17 ===
=== LMT v4.21 ===
Updated by laforge about 8 years ago · 6 revisions