Actions
BS11LMT » History » Revision 4
« Previous |
Revision 4/8
(diff)
| Next »
zecke, 02/19/2016 10:47 PM
Change pin out to follow the numbering printed on the adapter
How to use LMT
* connect serial port of PC with J2 on BS11 using the cable that came with the BS11
* start LMT program
=== LMT rs232 connector pinout ===
If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector:
{{{
The four E1 BNC connectors are above here.
(Rx) x x x x (right pin: Gnd)
(Tx) x x x x (right pin: +5V)
|
+ LMT
}}}
see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg]
'''J2:'''
{{{
5(GND)
|
| 3(TX)
| |
X 0 X 0
0 0 X 0
|
2(RX)
}}}
'''RS232:'''
{{{
5(GND)
|
| 3(TX)
| |
| | 2(RX)
| | |
X 0 X X 0
0 0 0 0
}}}
=== LMT v4.17 ===
=== LMT v4.21 ===
Updated by zecke about 8 years ago · 4 revisions