BS11LMT » History » Revision 4
Revision 3 (Anonymous, 02/19/2016 10:47 PM) → Revision 4/8 (zecke, 02/19/2016 10:47 PM)
== How to use LMT == * connect serial port of PC with J2 on BS11 using the cable that came with the BS11 * start LMT program === LMT rs232 connector pinout === If you look at the BS-11 interface (Antenne connectors top), its the upper 8-pin connector: {{{ The four E1 BNC connectors are above here. (Rx) x x x x (right pin: Gnd) (Tx) x x x x (right pin: +5V) | + LMT }}} see also [http://bs11-abis.gnumonks.org/trac/attachment/wiki/BS11_Configuration/bs11_power_lmt_cabling.jpg bs11_power_lmt_cabling.jpg] '''J2:''' [[Image(img_6412-1.jpg, 15%)]] {{{ 5(GND) 1(GND) | | 3(TX) 2(TX) | | X 0 X 0 0 0 X 0 | 2(RX) 3(RX) }}} '''RS232:''' [[Image(img_6414-1.jpg, 15%)]] {{{ 5(GND) 1(GND) | | 3(TX) 2(TX) | | | | 2(RX) 3(RX) | | | X 0 X X 0 0 0 0 0 }}} == Known Versions (and issues?) == === LMT v4.17 === === LMT v4.21 ===