Feature #4050: final osmo-clock-gen v2 changes - osmo-clock-gen - Open Source Mobile Communications

Actions

#1

Actions

#2

Checklist item clearance on short edges for slot-in mounting in extruded aluminium enclosures or "Baugruppentraeger" set to Done
Checklist item TC-2050 instead of TC-2030 for "standard" JTAG/SWD like other boards set to Done
Checklist item remove "A" and "D" label on east and west side of jumper block set to Done

Actions

#3

Actions

#4

I did not yet find proper space and clearance for an MTA100 header, as the area is huge and bulky a possible 180° shrouded UEXT header would occupy.

Also the clearance area on the short edged could be even more generous (2mm is utmost minimum needed, 3mm would be better).

Actions

#5

Checklist item MTA-100 at "east" edge of PCB for daisy-chained power cabling set to Done
Status changed from In Progress to Resolved
% Done changed from 70 to 100

finished compacting design and placing MTA100 header with 016e05e.

Hardware Projects » osmo-clock-gen