Actions
Support #3492
closedluca/gsmmtap/ branch cannot receive gsm packet
Status:
Closed
Priority:
Normal
Assignee:
-
Category:
-
Target version:
-
Start date:
08/21/2018
Due date:
% Done:
0%
Resolution:
Spec Reference:
Description
OS:
ubuntu 16.04 Linux bogon 4.4.0-21-generic #37-Ubuntu SMP
------------------------------------------------------------------------
after git clone osmocombb ,use luca/gsmmtap/ branch with modify c118 phone to sniffer gsm uplink information , run make ,compile successful.
then run:
# ./osmocon -m c123xor -p /dev/ttyUSB0 ../../target/firmware/board/compal_e88/layer1.compalram.bin
when upload success,it appears blew content,hangs.
PM MEAS: ARFCN=1023, 45 dBm at baseband, -92 dBm at RF
L1CTL_RESET_REQ: FULL!L1CTL_FBSB_REQ (arfcn=94, flags=0x7)
_# ./ccch_scan -i 127.0.0.1 -a 87
Copyright (C) 2010 Harald Welte <laforge@gnumonks.org>
Contributions by Holger Hans Peter Freyther
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Failed to connect to '/tmp/osmocom_sap'.
Failed during sap_open(), no SIM reader_
wireshark cannot receive any gsm packet.
======================how to find the reason ?
may be
- 1.oscomcon -m parameter
- use wrong branch to use modify c118 to sniffer uplink gsm packet?
thanks for any advice.
Actions