Actions
Bug #1425
closedsimtrace pinout of bootloader / reset switch is wrong
Start date:
Due date:
% Done:
0%
Spec Reference:
Description
The pinout of the switches (buttons) in our kicad library is wrong. The way they are configured right now, they will have permanent contact (permanently active).
Updated by tsaitgaist almost 13 years ago
- Resolution set to fixed
I remembered the circuit diagram wrong when setting the pin numbers.
Now corrected in KiCAD. gerber will be rendered with v1.0.
Updated by laforge about 8 years ago
- Project changed from OsmocomBB to SIMtrace
- Category changed from 244 to SIMtrace hardware
Actions