Project

General

Profile

Hardware » History » Version 11

laforge, 05/03/2017 06:40 AM

1 1 laforge
h1. Hardware
2
3 3 laforge
h2. Physical Setup / Board Stacking
4 2 laforge
5 1 laforge
The hardware consists of two circuit boards:
6
7
* Top board: AC/DC power supply and Ethernet switch
8
* Bottom board: Actual Femtocell mainboard
9
10
The two boards are sandwiched together by the following connections:
11
* 6-pin fine-pitch connector (most likely for DC power)
12
* flexible printed circuit cable (most likely for Ethernet MII/RMII)
13
* two large sheet metal parts for ground and/or thermal connection
14
15
It is thus not very straight forward to operate the opened device in a safe way (i.e. without live AC line voltage present).
16
17
We will be working on a way to operate it with injected safe low DC voltage, but that is still TBD.
18 4 laforge
19
h2. Major Components
20
21 8 laforge
h3. Femtocell SoC (U3)
22 4 laforge
23
Broadcomm BCM61610KFB1G (formerly Percello)
24
* no information found anywhere
25 9 laforge
* probably derivative of PRC6100
26
** http://www.node-h.com/en/news/article/Node-H_3GPP_Iu-h_Femtocell_Software_is_Standards_Compliant.php
27
** https://www.s3group.com/semiconductor-solutions/s3-percello-collaborate-produce-latest-femtocell-baseband-processor/
28
* probably derivative of PRC6000
29
** https://www.bdti.com/InsideDSP/2008/10/15/Percello
30
* contains MIPS24Kc core
31 4 laforge
32 8 laforge
h3. NAND Flash (U40)
33 4 laforge
34
Hynix H27U1G8F2BTR
35
* 1Gbit (128MByte) NAND Flash, x8 data bus, 3.3V, 2k page size, 128k erase block, 48pin TSOP1
36
* http://natisbad.org/NAS/refs/Hynix_NAND_128Mo_H27U1G8F2BT.pdf
37
38 5 laforge
h3. RF Transceiver
39 4 laforge
40
Maxim MAX2550
41
* Band I, V, and VIII WCDMA Femtocell Transceiver with GSM Monitoring
42
* https://www.maximintegrated.com/en/products/comms/wireless-rf/MAX2550.html
43
* https://datasheets.maximintegrated.com/en/ds/MAX2550.pdf
44 1 laforge
* https://www.maximintegrated.com/en/app-notes/index.mvp/id/5364
45 5 laforge
46
h3. Ethernet Switch
47
48 7 laforge
Atheros AR8236-AL1A
49
* 6-port Fast Ethernet Switch
50 1 laforge
* https://wikidevi.com/files/Atheros/specsheets/AR8326.pdf
51
* http://jhongtech.com/DOWN/ATHEROS--AR8236.pdf
52 8 laforge
53
h3. AC/DC switching power supply controller
54
55
* https://www.power.com/sites/default/files/product-docs/linkcv_family_datasheet.pdf
56 7 laforge
57 5 laforge
h2. Connectors
58
59
h3. Mainboard J2
60
61
* 12pos 2x6 1.27mm pitch header
62
* unpopulated
63 10 laforge
* likely (MIPS) JTAG and/or console
64 6 laforge
65
h3. Mainboard J3
66
67
* 30pos 0.5mm pitch FPC
68
* connects to PSU Board CON1
69
* likely LED + Ethernet
70 5 laforge
71
h3. Mainboard J4
72
73
* 3pos 2.54mm pitch hader, center pos missing
74
* used to supply 230V AC from mainboard to PSU board
75
* connects to PSU Board J4
76
77
h3. Mainboard J5
78
79
* 8pos 2x4 1.27mm pitch SMD header
80 11 laforge
* DC power input
81 1 laforge
* connects to PSU-Board J
82 11 laforge
83
|_.Pin|_.Function|
84
|1|4V DC (supply for LDOs on mainboard)|
85
|2|4V DC (supply for LDOs on mainboard)|
86
|3|GND|
87
|4|GND|
88
|5|GND|
89
|6|GND|
90
|7|3.3V DC (regulated on PSU board for Ethernet Switch)|
91
|8|3.3V DC (regulated on PSU board for Ethernet Switch)|
Add picture from clipboard (Maximum size: 48.8 MB)