| 1 | 48029c2b | Harald Welte | |
|---|---|---|---|
| 2 | You will probably need the followign commants: |
||
| 3 | |||
| 4 | make -f Makefile.dfu BOARD=SIMTRACE |
||
| 5 | make BOARD=SIMTRACE DEBUG=1 TARGET=main_simtrace |
||
| 6 | |||
| 7 | as well as possibly |
||
| 8 | |||
| 9 | cat dfu.bin main_simtrace.bin > main_simtrace.samba |
WARNING: this project only applies to the first generation SIMtrace hardware, which uses the Atmel AT91SAM7S micro-controller. This project is not supported anymore. The hardware and software are still working, but won't get updates. This project is now replaced by SIMtrace2, which uses the SAM3S replacement micro-controller.