1 |
c62f5734
|
Christian Daniel
|
---------------------------------------------------------------------------------------------------
|
2 |
|
|
-- Filename : usbrx_toplevel.vhd
|
3 |
|
|
-- Project : OsmoSDR FPGA Firmware
|
4 |
|
|
-- Purpose : Toplevel component
|
5 |
|
|
---------------------------------------------------------------------------------------------------
|
6 |
|
|
|
7 |
|
|
-----------------------------------------------------------------------------------
|
8 |
|
|
-- Copyright (C) 2012 maintech GmbH, Otto-Hahn-Str. 15, 97204 Hoechberg, Germany --
|
9 |
|
|
-- written by Matthias Kleffel --
|
10 |
|
|
-- --
|
11 |
|
|
-- This program is free software; you can redistribute it and/or modify --
|
12 |
|
|
-- it under the terms of the GNU General Public License as published by --
|
13 |
|
|
-- the Free Software Foundation as version 3 of the License, or --
|
14 |
|
|
-- --
|
15 |
|
|
-- This program is distributed in the hope that it will be useful, --
|
16 |
|
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of --
|
17 |
|
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --
|
18 |
|
|
-- GNU General Public License V3 for more details. --
|
19 |
|
|
-- --
|
20 |
|
|
-- You should have received a copy of the GNU General Public License --
|
21 |
|
|
-- along with this program. If not, see <http://www.gnu.org/licenses/>. --
|
22 |
|
|
-----------------------------------------------------------------------------------
|
23 |
|
|
|
24 |
|
|
library ieee;
|
25 |
|
|
use ieee.std_logic_1164.all;
|
26 |
|
|
use ieee.std_logic_misc.all;
|
27 |
|
|
use ieee.numeric_std.all;
|
28 |
|
|
library work;
|
29 |
|
|
use work.all;
|
30 |
|
|
use work.mt_toolbox.all;
|
31 |
|
|
use work.usbrx.all;
|
32 |
|
|
|
33 |
|
|
entity usbrx_toplevel is
|
34 |
|
|
port (
|
35 |
|
|
-- common
|
36 |
|
|
clk_in_pclk : in std_logic;
|
37 |
|
|
|
38 |
|
|
-- special control
|
39 |
|
|
dings : in std_logic;
|
40 |
|
|
dingsrst : in std_logic;
|
41 |
|
|
|
42 |
|
|
-- ADC interface
|
43 |
|
|
adc_cs : out std_logic;
|
44 |
|
|
adc_sck : out std_logic;
|
45 |
|
|
adc_sd1 : in std_logic;
|
46 |
|
|
adc_sd2 : in std_logic;
|
47 |
|
|
|
48 |
|
|
-- control SPI
|
49 |
|
|
ctl_int : out std_logic;
|
50 |
|
|
ctl_cs : in std_logic;
|
51 |
|
|
ctl_sck : in std_logic;
|
52 |
|
|
ctl_mosi : in std_logic;
|
53 |
|
|
ctl_miso : out std_logic;
|
54 |
|
|
|
55 |
|
|
-- data SPIs
|
56 |
|
|
rx_clk : out std_logic;
|
57 |
|
|
rx_syn : out std_logic;
|
58 |
|
|
rx_dat : out std_logic;
|
59 |
|
|
|
60 |
|
|
-- data SPIs
|
61 |
|
|
tx_clk : in std_logic;
|
62 |
|
|
tx_syn : in std_logic;
|
63 |
|
|
tx_dat : in std_logic;
|
64 |
|
|
|
65 |
|
|
-- gain PWMs
|
66 |
|
|
gain0 : out std_logic;
|
67 |
|
|
gain1 : out std_logic;
|
68 |
|
|
|
69 |
|
|
-- GPS
|
70 |
|
|
gps_1pps : in std_logic;
|
71 |
|
|
gps_10k : in std_logic;
|
72 |
|
|
|
73 |
|
|
-- gpios
|
74 |
83340d0b
|
Christian Daniel
|
led : inout std_logic;
|
75 |
c62f5734
|
Christian Daniel
|
gpio : inout std_logic_vector(9 downto 0);
|
76 |
|
|
|
77 |
|
|
-- virtual GNDs/VCCs
|
78 |
|
|
vgnd : out std_logic_vector(11 downto 0);
|
79 |
|
|
vcc33 : inout std_logic_vector(11 downto 0);
|
80 |
|
|
vcc12 : inout std_logic_vector(4 downto 0)
|
81 |
|
|
);
|
82 |
|
|
end usbrx_toplevel;
|
83 |
|
|
|
84 |
|
|
architecture rtl of usbrx_toplevel is
|
85 |
|
|
|
86 |
|
|
-- clocks
|
87 |
|
|
signal clk_30 : std_logic;
|
88 |
|
|
signal clk_80 : std_logic;
|
89 |
|
|
signal rst_30 : std_logic;
|
90 |
|
|
signal rst_80 : std_logic;
|
91 |
|
|
|
92 |
|
|
-- config
|
93 |
83340d0b
|
Christian Daniel
|
signal cfg_pwm : usbrx_pwm_config_t;
|
94 |
|
|
signal cfg_gpio : usbrx_gpio_config_t;
|
95 |
|
|
signal cfg_adc : usbrx_adc_config_t;
|
96 |
|
|
signal cfg_ssc : usbrx_ssc_config_t;
|
97 |
|
|
signal cfg_fil : usbrx_fil_config_t;
|
98 |
|
|
signal cfg_off : usbrx_off_config_t;
|
99 |
|
|
|
100 |
|
|
-- status
|
101 |
|
|
signal stat_ref : usbrx_ref_status_t;
|
102 |
|
|
signal stat_gpio : usbrx_gpio_status_t;
|
103 |
c62f5734
|
Christian Daniel
|
|
104 |
|
|
-- ADC <-> offset
|
105 |
|
|
signal adc_off_clk : std_logic;
|
106 |
|
|
signal adc_off_i : unsigned(13 downto 0);
|
107 |
|
|
signal adc_off_q : unsigned(13 downto 0);
|
108 |
|
|
|
109 |
|
|
-- offset <-> filter
|
110 |
|
|
signal off_fil_clk : std_logic;
|
111 |
|
|
signal off_fil_i : signed(15 downto 0);
|
112 |
|
|
signal off_fil_q : signed(15 downto 0);
|
113 |
|
|
|
114 |
|
|
-- filter <-> output
|
115 |
|
|
signal fil_out_clk : std_logic;
|
116 |
|
|
signal fil_out_i : signed(15 downto 0);
|
117 |
|
|
signal fil_out_q : signed(15 downto 0);
|
118 |
|
|
|
119 |
|
|
-- enusure that signal-names are kept (important for timing contraints)
|
120 |
|
|
attribute syn_keep of clk_in_pclk : signal is true;
|
121 |
|
|
|
122 |
|
|
begin
|
123 |
|
|
|
124 |
|
|
-- house-keeping
|
125 |
|
|
cg: entity usbrx_clkgen
|
126 |
|
|
port map (
|
127 |
|
|
-- clock input
|
128 |
|
|
clk_30_pclk => clk_in_pclk,
|
129 |
|
|
ext_rst => dingsrst,
|
130 |
|
|
|
131 |
|
|
-- system clock
|
132 |
|
|
clk_30 => clk_30,
|
133 |
|
|
clk_80 => clk_80,
|
134 |
|
|
rst_30 => rst_30,
|
135 |
83340d0b
|
Christian Daniel
|
rst_80 => rst_80
|
136 |
c62f5734
|
Christian Daniel
|
);
|
137 |
|
|
|
138 |
|
|
-- register bank
|
139 |
|
|
rb: entity usbrx_regbank
|
140 |
|
|
port map (
|
141 |
|
|
-- common
|
142 |
|
|
clk => clk_80,
|
143 |
|
|
reset => rst_80,
|
144 |
|
|
|
145 |
|
|
-- config
|
146 |
|
|
cfg_pwm => cfg_pwm,
|
147 |
|
|
cfg_adc => cfg_adc,
|
148 |
|
|
cfg_ssc => cfg_ssc,
|
149 |
|
|
cfg_fil => cfg_fil,
|
150 |
|
|
cfg_off => cfg_off,
|
151 |
83340d0b
|
Christian Daniel
|
cfg_gpio => cfg_gpio,
|
152 |
c62f5734
|
Christian Daniel
|
|
153 |
83340d0b
|
Christian Daniel
|
-- status
|
154 |
|
|
stat_ref => stat_ref,
|
155 |
|
|
stat_gpio => stat_gpio,
|
156 |
|
|
|
157 |
c62f5734
|
Christian Daniel
|
-- SPI interface
|
158 |
|
|
spi_ncs => ctl_cs,
|
159 |
|
|
spi_sclk => ctl_sck,
|
160 |
|
|
spi_mosi => ctl_mosi,
|
161 |
|
|
spi_miso => ctl_miso
|
162 |
|
|
);
|
163 |
83340d0b
|
Christian Daniel
|
|
164 |
|
|
-- reference clock measurement
|
165 |
|
|
refclk: entity usbrx_clkref
|
166 |
|
|
port map (
|
167 |
|
|
-- system clocks
|
168 |
|
|
clk_sys => clk_80,
|
169 |
|
|
rst_sys => rst_80,
|
170 |
|
|
|
171 |
|
|
-- reference signal
|
172 |
|
|
clk_ref => clk_30,
|
173 |
|
|
rst_ref => rst_30,
|
174 |
|
|
|
175 |
|
|
-- 1pps signal
|
176 |
|
|
gps_1pps => gps_1pps,
|
177 |
|
|
|
178 |
|
|
-- status
|
179 |
|
|
status => stat_ref
|
180 |
|
|
);
|
181 |
|
|
|
182 |
|
|
-- GPIOs
|
183 |
|
|
io: entity usbrx_gpio
|
184 |
|
|
port map (
|
185 |
|
|
-- common
|
186 |
|
|
clk => clk_80,
|
187 |
|
|
reset => rst_80,
|
188 |
|
|
|
189 |
|
|
-- GPIOs
|
190 |
|
|
gpio(9 downto 0) => gpio,
|
191 |
|
|
gpio(10) => led,
|
192 |
|
|
|
193 |
|
|
-- config / status
|
194 |
|
|
config => cfg_gpio,
|
195 |
|
|
status => stat_gpio
|
196 |
|
|
);
|
197 |
|
|
|
198 |
c62f5734
|
Christian Daniel
|
-- gain PWMs
|
199 |
|
|
pwm: entity usbrx_pwm
|
200 |
|
|
port map (
|
201 |
|
|
-- common
|
202 |
|
|
clk => clk_80,
|
203 |
|
|
reset => rst_80,
|
204 |
|
|
|
205 |
|
|
-- config
|
206 |
|
|
config => cfg_pwm,
|
207 |
|
|
|
208 |
|
|
-- PWM output
|
209 |
|
|
pwm0 => gain0,
|
210 |
|
|
pwm1 => gain1
|
211 |
|
|
);
|
212 |
|
|
|
213 |
|
|
-- A/D interface
|
214 |
|
|
adc: entity usbrx_ad7357
|
215 |
|
|
port map (
|
216 |
|
|
-- common
|
217 |
|
|
clk => clk_80,
|
218 |
|
|
reset => rst_80,
|
219 |
|
|
|
220 |
|
|
-- config
|
221 |
|
|
config => cfg_adc,
|
222 |
|
|
|
223 |
|
|
-- ADC interface
|
224 |
|
|
adc_cs => adc_cs,
|
225 |
|
|
adc_sck => adc_sck,
|
226 |
|
|
adc_sd1 => adc_sd1,
|
227 |
|
|
adc_sd2 => adc_sd2,
|
228 |
|
|
|
229 |
|
|
-- output
|
230 |
|
|
out_clk => adc_off_clk,
|
231 |
|
|
out_i => adc_off_i,
|
232 |
|
|
out_q => adc_off_q
|
233 |
|
|
);
|
234 |
|
|
|
235 |
|
|
-- offset stage
|
236 |
|
|
off: entity usbrx_offset
|
237 |
|
|
port map (
|
238 |
|
|
-- common
|
239 |
|
|
clk => clk_80,
|
240 |
|
|
reset => rst_80,
|
241 |
|
|
|
242 |
|
|
-- config
|
243 |
|
|
config => cfg_off,
|
244 |
|
|
|
245 |
|
|
-- input
|
246 |
|
|
in_clk => adc_off_clk,
|
247 |
|
|
in_i => adc_off_i,
|
248 |
|
|
in_q => adc_off_q,
|
249 |
|
|
|
250 |
|
|
-- output
|
251 |
|
|
out_clk => off_fil_clk,
|
252 |
|
|
out_i => off_fil_i,
|
253 |
|
|
out_q => off_fil_q
|
254 |
|
|
);
|
255 |
|
|
|
256 |
|
|
|
257 |
|
|
-- decimation filter
|
258 |
|
|
fil: entity usbrx_decimate
|
259 |
|
|
port map (
|
260 |
|
|
-- common
|
261 |
|
|
clk => clk_80,
|
262 |
|
|
reset => rst_80,
|
263 |
|
|
|
264 |
|
|
-- config
|
265 |
|
|
config => cfg_fil,
|
266 |
|
|
|
267 |
|
|
-- input
|
268 |
|
|
in_clk => off_fil_clk,
|
269 |
|
|
in_i => off_fil_i,
|
270 |
|
|
in_q => off_fil_q,
|
271 |
|
|
|
272 |
|
|
-- output
|
273 |
|
|
out_clk => fil_out_clk,
|
274 |
|
|
out_i => fil_out_i,
|
275 |
|
|
out_q => fil_out_q
|
276 |
|
|
);
|
277 |
|
|
|
278 |
|
|
-- SSC output
|
279 |
|
|
ssc: entity usbrx_ssc
|
280 |
|
|
port map (
|
281 |
|
|
-- common
|
282 |
|
|
clk => clk_80,
|
283 |
|
|
reset => rst_80,
|
284 |
|
|
|
285 |
|
|
-- config
|
286 |
|
|
config => cfg_ssc,
|
287 |
|
|
|
288 |
|
|
-- output
|
289 |
|
|
in_clk => fil_out_clk,
|
290 |
|
|
in_i => fil_out_i,
|
291 |
|
|
in_q => fil_out_q,
|
292 |
|
|
|
293 |
|
|
-- SSC interface
|
294 |
|
|
ssc_clk => rx_clk,
|
295 |
|
|
ssc_syn => rx_syn,
|
296 |
|
|
ssc_dat => rx_dat
|
297 |
|
|
);
|
298 |
|
|
|
299 |
83340d0b
|
Christian Daniel
|
-- drive unused IOs
|
300 |
c62f5734
|
Christian Daniel
|
ctl_int <= '1';
|
301 |
|
|
|
302 |
|
|
-- virtual GNDs/VCCs
|
303 |
|
|
vgnd <= (others=>'0');
|
304 |
|
|
vcc12 <= (others=>'Z');
|
305 |
|
|
vcc33 <= (others=>'1');
|
306 |
|
|
|
307 |
|
|
end rtl;
|
308 |
|
|
|
309 |
|
|
|