1 |
83340d0b
|
Christian Daniel
|
---------------------------------------------------------------------------------------------------
|
2 |
|
|
-- Filename : usbrx_gpio.vhd
|
3 |
|
|
-- Project : OsmoSDR FPGA Firmware
|
4 |
|
|
-- Purpose : GPIO Block
|
5 |
|
|
---------------------------------------------------------------------------------------------------
|
6 |
|
|
|
7 |
|
|
-----------------------------------------------------------------------------------
|
8 |
|
|
-- Copyright (C) 2012 maintech GmbH, Otto-Hahn-Str. 15, 97204 Hoechberg, Germany --
|
9 |
|
|
-- written by Matthias Kleffel --
|
10 |
|
|
-- --
|
11 |
|
|
-- This program is free software; you can redistribute it and/or modify --
|
12 |
|
|
-- it under the terms of the GNU General Public License as published by --
|
13 |
|
|
-- the Free Software Foundation as version 3 of the License, or --
|
14 |
|
|
-- --
|
15 |
|
|
-- This program is distributed in the hope that it will be useful, --
|
16 |
|
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of --
|
17 |
|
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the --
|
18 |
|
|
-- GNU General Public License V3 for more details. --
|
19 |
|
|
-- --
|
20 |
|
|
-- You should have received a copy of the GNU General Public License --
|
21 |
|
|
-- along with this program. If not, see <http://www.gnu.org/licenses/>. --
|
22 |
|
|
-----------------------------------------------------------------------------------
|
23 |
|
|
|
24 |
|
|
library ieee;
|
25 |
|
|
use ieee.std_logic_1164.all;
|
26 |
|
|
use ieee.numeric_std.all;
|
27 |
|
|
library work;
|
28 |
|
|
use work.all;
|
29 |
|
|
use work.mt_toolbox.all;
|
30 |
|
|
use work.usbrx.all;
|
31 |
|
|
|
32 |
|
|
entity usbrx_gpio is
|
33 |
|
|
port(
|
34 |
|
|
-- common
|
35 |
|
|
clk : in std_logic;
|
36 |
|
|
reset : in std_logic;
|
37 |
|
|
|
38 |
|
|
-- GPIOs
|
39 |
|
|
gpio : inout std_logic_vector(10 downto 0);
|
40 |
|
|
|
41 |
|
|
-- config / status
|
42 |
|
|
config : in usbrx_gpio_config_t;
|
43 |
|
|
status : out usbrx_gpio_status_t
|
44 |
|
|
);
|
45 |
|
|
end usbrx_gpio;
|
46 |
|
|
|
47 |
|
|
architecture rtl of usbrx_gpio is
|
48 |
|
|
|
49 |
|
|
-- register
|
50 |
|
|
signal ireg : std_logic_vector(10 downto 0) := (others=>'0');
|
51 |
|
|
signal oreg : std_logic_vector(10 downto 0) := (others=>'0');
|
52 |
|
|
signal oena : std_logic_vector(10 downto 0) := (others=>'0');
|
53 |
|
|
|
54 |
|
|
begin
|
55 |
|
|
|
56 |
|
|
-- create output-driver
|
57 |
|
|
od: for i in gpio'range generate
|
58 |
|
|
begin
|
59 |
|
|
gpio(i) <= oreg(i) when oena(i)='1' else 'Z';
|
60 |
|
|
end generate;
|
61 |
|
|
|
62 |
|
|
-- IOBs
|
63 |
|
|
process(clk)
|
64 |
|
|
begin
|
65 |
|
|
if rising_edge(clk) then
|
66 |
|
|
ireg <= to_X01(gpio);
|
67 |
|
|
oreg <= config.odata;
|
68 |
|
|
oena <= config.oena;
|
69 |
|
|
end if;
|
70 |
|
|
end process;
|
71 |
|
|
|
72 |
|
|
end rtl;
|