Raspberry Pi 3U Component Carrier Mount » History » Version 7
laforge, 03/07/2023 08:17 PM
| 1 | 1 | laforge | h1. Raspberry Pi 3U Component Carrier Mount |
|---|---|---|---|
| 2 | |||
| 3 | 4 | laforge | {{>toc}} |
| 4 | |||
| 5 | 1 | laforge | This project is about mounting a Raspberry Pi embedded Linux computer as a module that can slide into a standard 3U component carrier. |
| 6 | |||
| 7 | 4 | laforge | Why would one do that? The primary use case is to use it as control computer for a variety of other component carrier mounted boards. In this case it fits nicely next to the other boards you would like to control, e.g. via USB or UART. |
| 8 | |||
| 9 | In theory one could of course also assemble an entire component carrier with noting but such raspberry pi modules, but for this there are already a number of less expensive systems around on the market. |
||
| 10 | |||
| 11 | The advantage of this approach really is the capability to mix and match with other modules in this standardized form-factor. |
||
| 12 | |||
| 13 | h2. CAD design files |
||
| 14 | 1 | laforge | |
| 15 | 6 | laforge | Can be found in the @osmo-small-hardware.git@ repository at https://gitea.osmocom.org/electronics/osmo-small-hardware/src/branch/master/bgt-rpi |
| 16 | 1 | laforge | |
| 17 | h2. Pictures |
||
| 18 | |||
| 19 | {{thumbnail(rpi4-bgt-1.jpg)}} |
||
| 20 | {{thumbnail(rpi4-bgt-2.jpg)}} |
||
| 21 | {{thumbnail(rpi4-bgt-3.jpg)}} |
||
| 22 | 3 | laforge | {{thumbnail(rpi4-bgt-5.jpg)}} |
| 23 | 7 | laforge | |
| 24 | If you install them in a rack, it could look like this: |
||
| 25 | |||
| 26 | {{thumbnail(20230307_210805.jpg)}} |
