Getting Started » History » Version 1
laforge, 03/10/2022 09:41 AM
1 | 1 | laforge | h1. Getting Started |
---|---|---|---|
2 | |||
3 | This page is a work-in-progress documenting what you need to do to get connected to the [[Community_TDMSS7_Network]] using an icE1usb. |
||
4 | |||
5 | h2. Required Hardware |
||
6 | |||
7 | * [[e1-t1-adapter:ICE40_E1_USB_interface|icE1usb]] hardware (contact @sales@sysmocom.de@ for an OCTOI community special price of EUR 75) |
||
8 | * GPS antenna with SMA male plug (not included) |
||
9 | * Some equipment with an E1 interface which you want to connect to the community network. Typically this is a PBX with E1/PRI/S2M upstream connection. |
||
10 | * Some computer running Linux with a USB host controller to connect the icE1usb to. Note: Many USB XHCI host controllers suffer from bugs, restricting operation to only one of the two E1 ports, see [[e1-t1-adapter:Isochronous_USB_Issues]] for details. If you have a system with UHCI/OHCI/EHCI, use that. |
||
11 | |||
12 | h2. Major steps required for setup |
||
13 | |||
14 | # Installing latest gateware and firmware into the icE1usb |
||
15 | # building + installing the @laforge/e1oip@ branch of [[osmo-e1d]] |
||
16 | # requesting a connection with the OCTOI hub |
||
17 | # creating a config file for @osmo-e1d@ |
||
18 | # possibly adding a port forward in your router |