Wiki » History » Revision 1
Revision 1/10
| Next »
laforge, 11/25/2016 04:20 PM
multi-voltage dual USB UART¶
This is a CP2105 based dual-port USB UART.
As a very special feature, this device allows you to manually select the UART voltage levels to 1.8, 2.3, 2.5, 2.8, 3.0 or 3.3 Volts.
It is thus ideal for a lab environment, where you frequently need to interconnect with various embedded electronics devices that have UARTs at unusual voltages.
Both UART ports feature RxD/TxD/RTS/CTS signals and have TVS diodes for ESD protection.
Miscellaneous CP2105 GPIOs are available on a separate header
Pictures¶
Design Files / Schematics / Layour¶
The EAGLE design files for this open hardware project are available in the osmocom-small-hardware.git
repository and can be checked out usinggit clone git://git.osmocom.org/osmo-small-hardware.git
.
PDF renderings of schematics and component placement are attached below.
Availability¶
A fully assembled circuit board can be obtained from http://shop.sysmocom.de/products/multi-voltage-usb-dual-uart
Updated by laforge over 7 years ago · 1 revisions