Libosmo-abis » History » Revision 6
« Previous |
Revision 6/12
(diff)
| Next »
fixeria, 09/25/2018 06:57 PM
libosmo-abis¶
General description¶
This is a library containing common/shared code regarding the A-bis interface between BTS and BSC.
It implements drivers for mISDN and DAHDI based E1 cards, as well as some A-bis/IP dialects.
Source code¶
To obtain libosmo-abis, you can use the following git URL:
git clone git://git.osmocom.org/libosmo-abis.git
Input Drivers¶
There are currently the following input drivers available:
misdn¶
This input driver supports the mISDN code as it is present in mainline linux-2.6 kernels.
It uses the in-kernel LAPD implementation, and is thus bound to some restrictions. Specifically,
you can only have one signalling timeslot (D-channel) in every E1 line, which may cause problems
with multi-BTS or multi-TRX setups (particularly in the case of Nokia A-bis)
You have to configure which E1 timeslot is to be used for signalling by module parameters, e.g.
modprobe hfcmulti dslot=1
will configure TS1 as signalling.
misdn_lapd¶
This input driver supports the mISDN code as it is present in mainline linux-2.6 kernels.
However, unlike the "misdn" driver, it runs LAPD in userspace, as part of libosmo-abis.
In order to be able to use it, you will need to make sure the mISDN kernel driver does not
configure any timeslot to signalling, e.g.
modprobe hfcmulti dslot=-1
(notice the "-" in front of 1 to indicate "no signalling timeslot").
dahdi¶
This driver supports the DAHDI (formerly known as zaptel) out-of-tree drivers for e.g.
the various Digium and Digium compatible E1/T1/J1 cards.
ipa¶
This implements the ip.access A-bis/IP multiplex protocol.
hsl¶
Experimental driver for support of the [HSL_Femto]
Updated by fixeria over 5 years ago · 6 revisions