RUS 01 B3 » History » Revision 3
Revision 2 (roh, 05/13/2020 08:51 PM) → Revision 3/7 (laforge, 05/14/2020 09:25 AM)
h1. RUS 01 B3
h2. Connectors
h3. PWR
{{thumbnail(RUS_01_B3_DC_in_detail.jpg, size=400)}}
h3. LEDs
{{thumbnail(RUS_01_B3_LED_detail.jpg, size=400)}}
h3. Front-Haul Back-Haul interface (CPRI)
These look like SFP connectors, but are not. They are of a special connector type, but have the same electrical signaling.
We presume Ericsson did this so you cannot easily use a RUS remotely by plugging in a SFP transceiver for fiber optic transmission.
Instead, you have to use special copper CPRI cables from Ericsson: RPM 777 211/xxxxx where xxxxx is the length in mm.
{{thumbnail(RUS_01_B3_Data2_Data1_detail.jpg, size=400)}}
h3. RF
{{thumbnail(RUS_01_B3_RF_A_detail.jpg, size=400)}}
{{thumbnail(RUS_01_B3_RF_B_detail.jpg, size=400)}}
h3. RXA OUT RXB I/O
{{thumbnail(RUS_01_B3_RXA_RXB_detail.jpg, size=400)}}
h3. PA-Filter Jumper
{{thumbnail(RUS_01_B3_PA_Filter_jumper_removed_detail.jpg, size=400)}}
{{thumbnail(RUS_01_B3_PA_Filter_jumper_seperate_detail.jpg, size=400)}}
h3. Connector on the Back
{{thumbnail(RUS_01_B3_backplane_detail.jpg, size=400)}}
h2. Overview Pictures
{{thumbnail(RUS_01_B3_front_perspective.jpg, size=400)}}
{{thumbnail(RUS_01_B3_left_perspective.jpg, size=400)}}
{{thumbnail(RUS_01_B3_right_perspective.jpg, size=400)}}
{{thumbnail(RUS_01_B3_back_perspective.jpg, size=400)}}
{{thumbnail(RUS_01_B3_top_complete.jpg, size=400)}}
{{thumbnail(RUS_01_B3_bottom_complete.jpg, size=400)}}
