Project

General

Profile

Actions

RUS 01 B3 » History » Revision 3

« Previous | Revision 3/7 (diff) | Next »
laforge, 05/14/2020 09:25 AM


RUS 01 B3

Connectors

PWR

RUS_01_B3_DC_in_detail.jpg

LEDs

RUS_01_B3_LED_detail.jpg

Front-Haul interface (CPRI)

These look like SFP connectors, but are not. They are of a special connector type, but have the same electrical signaling.

We presume Ericsson did this so you cannot easily use a RUS remotely by plugging in a SFP transceiver for fiber optic transmission.

Instead, you have to use special copper CPRI cables from Ericsson: RPM 777 211/xxxxx where xxxxx is the length in mm.

RUS_01_B3_Data2_Data1_detail.jpg

RF

RUS_01_B3_RF_A_detail.jpg RUS_01_B3_RF_B_detail.jpg

RXA OUT RXB I/O

RUS_01_B3_RXA_RXB_detail.jpg

PA-Filter Jumper

RUS_01_B3_PA_Filter_jumper_removed_detail.jpg RUS_01_B3_PA_Filter_jumper_seperate_detail.jpg

Connector on the Back

RUS_01_B3_backplane_detail.jpg

Overview Pictures

RUS_01_B3_front_perspective.jpg RUS_01_B3_left_perspective.jpg RUS_01_B3_right_perspective.jpg RUS_01_B3_back_perspective.jpg RUS_01_B3_top_complete.jpg RUS_01_B3_bottom_complete.jpg

Updated by laforge over 2 years ago · 3 revisions

Add picture from clipboard (Maximum size: 48.8 MB)