RBS6402 » History » Version 2
laforge, 08/15/2019 05:21 PM
| 1 | 1 | laforge | h1. RBS6402 |
|---|---|---|---|
| 2 | |||
| 3 | 2 | laforge | Contrary to the General/typical RBS6000 family, the RBS6402 is a small cell. It is not modular and doesn't consist of modules like DUL/RUS. It doesn't have any CPRI connections. It can support up to three radio modules and comes in a varity of different LTE bands. |
| 4 | |||
| 5 | |||
| 6 | 1 | laforge | h2. connectors |
| 7 | |||
| 8 | h3. WAN B |
||
| 9 | |||
| 10 | this is a standard SFP connector, you can use any gigabit ethernet compatible MM or SM SFP module on it |
||
| 11 | |||
| 12 | h3. WAN A / PoE |
||
| 13 | |||
| 14 | Use a LTPoE++ capable 90W PoE injector here |
||
| 15 | |||
| 16 | h3. 48V |
||
| 17 | |||
| 18 | This is a standard 3.5mm terminal block. You can e.g. use a "Wurth Electronic 691361100002":https://octopart.com/691361100002-würth+elektronik-18818376 |
||
| 19 | |||
| 20 | h3. Fan |
||
| 21 | |||
| 22 | The fan connector has two pins with +5V and two pins with GND. You can use a "Molex 43025-0408":https://octopart.com/43025-0408-molex-24935555 part to mate it. This is just the housing, you will need crimp contacts and matching crimp tool, or you use pre-crimped wires like "Molex 79758-0010":https://octopart.com/79758-0010-molex-24727080. |
||
| 23 | |||
| 24 | The two top pins (near the latch) are GND, while the two bottom pins (near the enclosure) are +5V. |
