NCD 901 601 GPS Receiver » History » Version 4
steviehs, 01/17/2024 04:42 PM
1 | 1 | laforge | h1. NCD 901 60/1 GPS Receiver |
---|---|---|---|
2 | |||
3 | The NCD 901 60/1 is a GPS receiver for clock reference purpose, sold as accessory to the [[RBS6402]] eNodeB. |
||
4 | |||
5 | h2. Major internal parts |
||
6 | |||
7 | It consists of the following major parts: |
||
8 | * "Trimble RES 360 SMT GNSS receiver module":https://timing.trimble.com/products/gnss-receivers/res-smt-360-multi-gnss-timing-module/ |
||
9 | * "STM32F105 Cortex-M3 Microcontroller":https://www.st.com/en/microcontrollers-microprocessors/stm32f105-107.html |
||
10 | * "MuRata NXE1S0305MC":https://www.murata.com/products/productdetail?partno=NXE1S0305MC isolated DC/DC conveter for phantom power to GNSS antenna |
||
11 | |||
12 | 2 | laforge | {{thumbnail(ncd90160_pcba.jpg)}} |
13 | |||
14 | 1 | laforge | h2. External interfaces |
15 | |||
16 | 3 | laforge | {{thumbnail(ncd90160_edge.jpg)}} |
17 | |||
18 | 1 | laforge | h3. RJ45 conenctor to RBS6402 |
19 | |||
20 | pin-out and signals are yet TBD, but judging from other Ericsson GPS receivers, it is safe to assume 12V supply and RS485 for NMEA. |
||
21 | |||
22 | h3. SMA connector to GNSS antenna |
||
23 | |||
24 | The SMA connector features a 5V/1W isolated phantom power DC supply |
||
25 | |||
26 | 4 | steviehs | h3. LED |
27 | |||
28 | The green LED blinks, when the receiver is powered and goes to constant green when the GPS signal is locked. This could also be checked with issuing: |
||
29 | |||
30 | show ManagedElement=foo,Transport=1,Synchronization=1,RadioEquipmentClock=1,clockState |
||
31 | |||
32 | from the CLI. |
||
33 | |||
34 | When the receiver is locked, the output is: |
||
35 | |||
36 | clockState=LOCKED |
||
37 | |||
38 | while it is |
||
39 | |||
40 | clockState=HOLDOVER |
||
41 | |||
42 | when there is no GPS receiver connected or the device is not locked. |
||
43 | |||
44 | |||
45 | |||
46 | 1 | laforge | h2. Part Numbers |
47 | |||
48 | |_.Part Number|_.Description| |
||
49 | |NCD 901 60/1|GPS Receiver Unit (with RJ45 and SMA)| |
||
50 | |RPM 5132372/2900|RBS6402 GPS Cable (RJ45 + proprietary connector)| |
||
51 | |TSR 432 151/3000|DUS GPS Cable (RJ45 to RJ45)| |
||
52 | |NTB 801 0070/1|Kit consisting of three items above| |