Project

General

Profile

DUG 20 » History » Version 9

laforge, 08/09/2020 02:32 PM

1 1 laforge
h1. DUG 20
2
3 2 laforge
This is the second-generation GSM Digital Unit for RBS 6xxx.  It combines the baseband processing and back-haul interface of up to 12 TRX, in 1..6 logical BTSs.
4 1 laforge
5 2 laforge
The DUG 20 is only compatible with the [[RUS]] and [[RRUS]] radio units, not with the older [[RUG]] units.
6
7 3 roh
{{thumbnail(DUG20_01_front_complete.jpg, size=900)}}
8
9 4 roh
{{>toc}}
10
11 2 laforge
h2. Technical data
12
13
* 48V DC supply power
14
* 70W maximal power consumption
15
* Size: 8U x 31mm x 250mm
16
* Weight: < 2kg
17
18 7 laforge
h2. Flash
19 2 laforge
20 7 laforge
There is a CF slot on the left this device and it holds a 256mbyte CF card.  The card contains a FAT filesystem with both the software as well as the configuration (IDB = Installatin DataBase).
21 1 laforge
22 7 laforge
{{thumbnail(DUG20_01_CF-slot_detail.jpg, size=400)}}
23 1 laforge
24 7 laforge
h2. Connections
25 2 laforge
26 7 laforge
h3. Front Haul
27 2 laforge
28 7 laforge
The DUG 20 has 6 SFP slots for the interface towards the radio units, labelled RI A..F
29 3 roh
30 7 laforge
{{thumbnail(DUG20_01_SFP_1_detail.jpg, size=400)}}
31
{{thumbnail(DUG20_01_SFP_2_detail.jpg, size=400)}}
32 3 roh
33 7 laforge
This is where you connect your [[RUS]] or [[RRUS]], either via direct-attach cables (usual for RUS), or via SFP transceivers and optical fiber (usual for RRUS).
34 3 roh
35 7 laforge
h3. Back-Haul interface
36 3 roh
37 7 laforge
The back-haul interface is Classic T1/E1/J1 (ISDN) based.  The DUG has four T1/E1/J1 lines exposed as two RJ45 connectors ("ET A" and "ET B")
38 3 roh
39 7 laforge
{{thumbnail(DUG20_01_ETB_ETA_detail.jpg, size=400)}}
40 1 laforge
41 7 laforge
Pinout: FIXME
42 1 laforge
43
h3. ESB port
44
45
note that its a bit smaller than the sfp slots
46
47
{{thumbnail(DUG20_01_ESB_detail.jpg, size=400)}}
48
49
h3. LMT B, LMT A, EC, GPS
50
51
{{thumbnail(DUG20_01_LMT_GPS_detail.jpg, size=400)}}
52
53 7 laforge
h3. LMT A
54
55
LMT (Local Maintenance Terminal) A hosts a RS-232 port used for connecting to the DUG 20 from a PC running the OMT software.
56
57 8 laforge
|_.RJ45|_.DB-9 (female)|_.Signal|
58
|1|5|GND|
59
|2|3|TxD|
60
|3|2|RxD|
61
62 1 laforge
h3. LMT B
63 9 laforge
64
Site-LAN and LMT B
65 7 laforge
66
FIXME
67
68
h3. EC
69
70
FIXME.
71
72
h3. GPS
73
74
This port is meant for attaching an external GPS receiver.  The connector includes
75
* RS485/422 receiver for NMEA from the GPS
76
* RS485/422 transmitter for command to the GPS
77
* RS485/422 receiver for 1PPS signal from the GPS
78
* 12V power supply for the GPS
79
80 1 laforge
h3. 48V DC in
81
82
Connectory type is a https://www.te.com/usa-en/product-1982299-3.html with associated crimp contacts.
83
84
{{thumbnail(DUG20_01_DC_in_detail.jpg, size=400)}}
85
86 7 laforge
87 3 roh
h3. Connector on the Back
88
89 7 laforge
This connector is not used during normal operation.  We assume it is for factory / service use only.
90
91 3 roh
{{thumbnail(DUG20_01_backplane_detail.jpg, size=400)}}
92 7 laforge
93
94
h2. LEDs
95
96
{{thumbnail(DUG20_01_LED_detail.jpg, size=400)}}
97
98
99 3 roh
100
h2. Overview Pictures
101
102
{{thumbnail(DUG20_01_front_perspective.jpg, size=400)}}
103
{{thumbnail(DUG20_01_left_perspective.jpg, size=400)}}
104
{{thumbnail(DUG20_01_right_perspective.jpg, size=400)}}
105
{{thumbnail(DUG20_01_back_perspective.jpg, size=400)}}
106
{{thumbnail(DUG20_01_bottom_complete.jpg, size=400)}}
Add picture from clipboard (Maximum size: 48.8 MB)