Siemens GSM-R Cab Radio » History » Version 9
laforge, 01/23/2023 06:48 PM
| 1 | 3 | laforge | {{>toc}} |
|---|---|---|---|
| 2 | 1 | laforge | |
| 3 | 3 | laforge | h1. Siemens GSM-R CAB Radio |
| 4 | |||
| 5 | Osmocom has been provided with two ancient Siemens GSM CAB Radio devices, i.e. the kind of MS installed fixed into a train engine. |
||
| 6 | |||
| 7 | {{thumbnail(20230123_184656.jpg)}} |
||
| 8 | {{thumbnail(20230123_184637.jpg)}} |
||
| 9 | |||
| 10 | |||
| 11 | h2. Sub-Rack Hardware |
||
| 12 | |||
| 13 | {{thumbnail(20230123_184513.jpg)}} |
||
| 14 | |||
| 15 | |||
| 16 | h3. Backplane |
||
| 17 | |||
| 18 | At the back of the sub-rack there's a custom back-plane to interconnect the various modules |
||
| 19 | |||
| 20 | {{thumbnail(20230123_183101.jpg)}} |
||
| 21 | {{thumbnail(20230123_182917.jpg)}} |
||
| 22 | |||
| 23 | h3. High Voltage Power Supply Module |
||
| 24 | |||
| 25 | This is a fully encapsulated, passive cooled, DC/DC converter with |
||
| 26 | * Input voltage 65..150V |
||
| 27 | * Two output voltage rails of 12V / 4A |
||
| 28 | |||
| 29 | 4 | laforge | {{thumbnail(20230123_183623.jpg)}} |
| 30 | 3 | laforge | |
| 31 | 4 | laforge | |
| 32 | 3 | laforge | h3. 12V -> 5V DC/DC converter Module |
| 33 | |||
| 34 | This is a circuit board that generates a 5V rail from 12V |
||
| 35 | |||
| 36 | 4 | laforge | {{thumbnail(20230123_183545.jpg)}} |
| 37 | {{thumbnail(20230123_183508.jpg)}} |
||
| 38 | 3 | laforge | |
| 39 | h3. GSM Modem Module |
||
| 40 | |||
| 41 | This is a module implementing the actual GSM-R modem. It consts of two circuit boards: One digital and one analog/RF. |
||
| 42 | |||
| 43 | 4 | laforge | {{thumbnail(20230123_184407.jpg)}} |
| 44 | {{thumbnail(20230123_184419.jpg)}} |
||
| 45 | {{thumbnail(20230123_184432.jpg)}} |
||
| 46 | {{thumbnail(20230123_184452.jpg)}} |
||
| 47 | |||
| 48 | 3 | laforge | h4. Digital Board |
| 49 | 1 | laforge | |
| 50 | 5 | laforge | {{thumbnail(20230123_184241.jpg)}} |
| 51 | {{thumbnail(20230123_184021.jpg)}} |
||
| 52 | {{thumbnail(20230123_184031.jpg)}} |
||
| 53 | {{thumbnail(20230123_184051.jpg)}} |
||
| 54 | {{thumbnail(20230123_184105.jpg)}} |
||
| 55 | 3 | laforge | |
| 56 | h4. RF Board |
||
| 57 | |||
| 58 | 6 | laforge | {{thumbnail(20230123_184153.jpg)}} |
| 59 | {{thumbnail(20230123_184143.jpg)}} |
||
| 60 | {{thumbnail(20230123_184116.jpg)}} |
||
| 61 | {{thumbnail(20230123_184003.jpg)}} |
||
| 62 | {{thumbnail(20230123_183952.jpg)}} |
||
| 63 | {{thumbnail(20230123_183940.jpg)}} |
||
| 64 | |||
| 65 | 3 | laforge | h3. PC/104 embedded PC Module |
| 66 | |||
| 67 | 1 | laforge | This is a carrier board hosting a PC/104 embedded x86 Mainboard. |
| 68 | |||
| 69 | 7 | laforge | {{thumbnail(20230123_183800.jpg)}} |
| 70 | |||
| 71 | 1 | laforge | h4. Carrier |
| 72 | |||
| 73 | 7 | laforge | {{thumbnail(20230123_183641.jpg)}} |
| 74 | {{thumbnail(20230123_183815.jpg)}} |
||
| 75 | |||
| 76 | 1 | laforge | h4. PC/104 x86 SBC |
| 77 | |||
| 78 | 7 | laforge | {{thumbnail(20230123_183714.jpg)}} |
| 79 | {{thumbnail(20230123_183728.jpg)}} |
||
| 80 | {{thumbnail(20230123_183747.jpg)}} |
||
| 81 | 3 | laforge | |
| 82 | h3. I/O board |
||
| 83 | |||
| 84 | This is a board that brings signals from the backplane and frontplane and brings them to connectors towards the main connector panel. |
||
| 85 | |||
| 86 | 8 | laforge | {{thumbnail(20230123_183235.jpg)}} |
| 87 | {{thumbnail(20230123_183213.jpg)}} |
||
| 88 | {{thumbnail(20230123_183139.jpg)}} |
||
| 89 | {{thumbnail(20230123_183123.jpg)}} |
||
| 90 | |||
| 91 | 9 | laforge | h3. Audio PA + Relay board |
| 92 | |||
| 93 | This board appears to contain an audio Power Amplifier |
||
| 94 | |||
| 95 | {{thumbnail(20230123_183434.jpg)}} |
||
| 96 | {{thumbnail(20230123_183356.jpg)}} |
||
| 97 | {{thumbnail(20230123_183327.jpg)}} |
||
| 98 | {{thumbnail(20230123_183316.jpg)}} |
||
| 99 | {{thumbnail(20230123_183303.jpg)}} |
||
| 100 | 3 | laforge | |
| 101 | h2. Handset Hardware |
||
| 102 | |||
| 103 | |||
| 104 | |||
| 105 | 1 | laforge | h2. Connector pinout |
| 106 | 2 | laforge | |
| 107 | h3. EXT RADIO (DB-15 female) |
||
| 108 | |||
| 109 | h3. SER I/O (DB-25 male) |
||
| 110 | |||
| 111 | h3. HMI 1 (DB-25 female) |
||
| 112 | |||
| 113 | h3. HMI 2 (DB-25 female) |
||
| 114 | |||
| 115 | h3. MVB OUT (DB-9 female) |
||
| 116 | |||
| 117 | h3. MVB IN (DB-9 female) |
||
| 118 | |||
| 119 | h3. ANT (N) |
||
| 120 | |||
| 121 | This a standdard 50-ohms N-type conector to connect to the GSM-R antenna. |
||
| 122 | |||
| 123 | 1 | laforge | h3. PMU (DB-9 male) |
| 124 | 2 | laforge | |
| 125 | 3 | laforge | This connector is forwarded internally to the DB-9 connector on the front of the embedded PC. Probably serial console. |
| 126 | 2 | laforge | |
| 127 | h3. TRAIN POWER AND I/O (circular connector) |
||
| 128 | 1 | laforge | |
| 129 | |_.Pin (ext)|_.Internal Connector|_.Internal Connector Pin|_.Wire color|_.Purpose| |
||
| 130 | |H|PL6|1|rose|| |
||
| 131 | |K|PL6|2|white|| |
||
| 132 | |M|PL6|3|green|| |
||
| 133 | |P|PL6|4|purple|| |
||
| 134 | |S|PL6|5|blue|| |
||
| 135 | |J|PL6|6|black|| |
||
| 136 | |L|PL6|7|red|| |
||
| 137 | |N|PL6|8|yellow|| |
||
| 138 | |R|PL6|9|orange|| |
||
| 139 | |B|PL6|10|green|| |
||
| 140 | |T|PL7|1|white|| |
||
| 141 | |d|PL7|2|green|| |
||
| 142 | |F|PL7|4|blue|| |
||
| 143 | |A|PL7|5|red|| |
||
| 144 | |U|PL7|6|rose|| |
||
| 145 | |e|PL7|7|blue|| |
||
| 146 | |G|PL7|9|grey|| |
||
| 147 | |C|PL7|10|yellow|| |
||
| 148 | |V|PL8|1|white|| |
||
| 149 | |D|PL8|3|purple|| |
||
| 150 | |W|PL8|4|red|| |
||
| 151 | |E|PL8|6|orange|| |
||
| 152 | |c|PL9|1|orange|| |
||
| 153 | |Z|PL9|2|rose|| |
||
| 154 | |X|PL9|3|green|| |
||
| 155 | |b|PL9|4|grey|| |
||
| 156 | |a|PL9|5|red|| |
||
| 157 | |Y|PL9|6|yellow|| |
