TypicalCalypsoModemDesign » History » Version 3
laforge, 02/19/2016 10:49 PM
1 | 1 | laforge | This modem design is used in the GT-001, GTA01, GTA02, early HXD8 and possibly a number of other older FIC GSM products. |
---|---|---|---|
2 | |||
3 | It is a tri-band GSM modem design with support for GPRS. |
||
4 | 2 | laforge | |
5 | The block layout of this modem looks like this: |
||
6 | [[Image(calypso-block.png)]] |
||
7 | 3 | laforge | |
8 | * Yellow: Clocks |
||
9 | * Red: Digital Serial interfaces like SPI |
||
10 | * Green: Analog I/Q differential baseband data |
||
11 | * Magenta: RF signals |
||
12 | * Blue: TSP, the time sequence port, sometimes parallel, sometimes serial |
||
13 | |||
14 | Glossary: |
||
15 | * ABB: Analog Base Band |
||
16 | * AFC: Automatic Frequency Correction (tuning of the VTXCO by ABB) |
||
17 | * APC: Automatic Power Correction (Tx Power envelope from ABB to PA) |
||
18 | * BSP: Baseband Serial Port, like SPI |
||
19 | * DBB: Digital Base Band, like SPI |
||
20 | * USP: uController Serial Port |
||
21 | * RFCLK: A 26MHz master clock generated by the Transceiver |
||
22 | * CLK13M: 13MHz system clock provided by DBB |
||
23 | * CLK32K: A 32.768kHz RTC clock signal |