Mobile » History » Version 1
laforge, 02/19/2016 10:49 PM
add page about 'mobile'
1 | 1 | laforge | [[PageOutline]] |
---|---|---|---|
2 | = The {{{mobile}}} program = |
||
3 | |||
4 | The {{{mobile}}} program is one of the various host (PC) based programs that you can use together with the {{{layer1.*.bin}}} firmware images inside the phone. |
||
5 | |||
6 | {{{mobile}}} is the most sophisticated OsmocomBB application so far. It implements the behavior of a regular GSM telephone, but is |
||
7 | extended in many ways with features interesting to researchers. |
||
8 | |||
9 | Using {{{mobile}}, you can e.g. |
||
10 | * perform cell (re)selection according to TS 03.22 |
||
11 | * MM procedures like location updating, authentication, encryption |
||
12 | * send and receive SMS |
||
13 | * Establish MT and MO voice calls |
||
14 | |||
15 | In the spirit of all Osmocom projects, the user interface of {{{mobile}}} is based on text commands issued on the command line. |
||
16 | |||
17 | == Prerequirements == |
||
18 | |||
19 | It is assumed that you have already obtained the OsmocomBB source code and compiled both the host programs as well as the firmware |
||
20 | (using a cross-compiler). Please see the general OsmocomBB GettingStarted for guidance. |
||
21 | |||
22 | == Getting started with {{mobile}} == |
||
23 | |||
24 | You need to follow the usual procedure using a SerialCable, {{osmocon}} and the {{layer1.*.bin}} firmware image for your phone. |
||
25 | |||
26 | FIXME |
||
27 | |||
28 | == Command Reference == |
||
29 | |||
30 | FIXME |
||
31 | |||
32 | == Authors == |
||
33 | |||
34 | {{{mobile}}} was primarily written by Andreas Eversberg, based on some initial work that Harald did on layer23. The list of contributors is long, see the git log for details. |