ELSA MicroLink ISDN 2ab » History » Version 6
laforge, 11/29/2022 04:39 PM
1 | 1 | laforge | h1. ELSA MicroLink ISDN 2a/b |
---|---|---|---|
2 | |||
3 | This is an ISDN terminal adapter with built-in a/b-Adapter for atraching analog devices (phones/modem) to an ISDN S0-bus. |
||
4 | |||
5 | 3 | laforge | {{thumbnail(ELSA_MicroLink_ISDN_2ab_front.jpg)}} |
6 | {{thumbnail(ELSA_MicroLink_ISDN_2ab_back.jpg)}} |
||
7 | {{thumbnail(ELSA_MicroLink_ISDN_2ab_bottom.jpg)}} |
||
8 | |||
9 | 4 | laforge | It appears to also have been sold as "ELSA Tango 2000", at least it shares the same firmware update files. |
10 | |||
11 | 1 | laforge | |Supply Voltage|24V AC| |
12 | |Power Consumption|?| |
||
13 | |RS232 Connector|mini-DIN (adapter to DB9 + DB25 included)| |
||
14 | |Line Connector|RJ-11 (unusual for ISDN)| |
||
15 | 2 | laforge | |
16 | h2. MicroLink mini-DIN pin-out |
||
17 | |||
18 | 6 | laforge | See [[retro-bbs:Devolo_MicroLink_56k_Fun_II#MicroLink-mini-din-pin-out]] for the pin-out. |
19 | 4 | laforge | |
20 | h2. AT commands |
||
21 | |||
22 | h3. Setting the MSN |
||
23 | |||
24 | <pre> |
||
25 | AT$IMSN=0,“MSN1“,“MSN2“,“MSN3“ |
||
26 | </pre> |
||
27 | |||
28 | h3. Setting the bearer protocol |
||
29 | |||
30 | <pre> |
||
31 | 5 | laforge | Syntax: AT$IBP=<wert1> |
32 | 4 | laforge | |
33 | 5 | laforge | Parameter Wert Bedeutung |
34 | |||
35 | wert1 X75 X.75 Protokoll |
||
36 | X75T70 T70NL- Protokoll |
||
37 | V120 V.120 Protokoll |
||
38 | V110 V.110 Protokoll |
||
39 | HDLC HDLC - Protokoll |
||
40 | TRANS Transparent |
||
41 | HDLCP HDLC - PPP - Protokoll |
||
42 | BTX X.75, T.70NL und Cept/Kit |
||
43 | X75FB1 X.75 -> HDLCP |
||
44 | X75FB2 X.75 -> V.120 -> HDLCP |
||
45 | X75FB3 X.75 -> V.120 |
||
46 | V120FB1 V.120 -> HDLCP |
||
47 | 4 | laforge | </pre> |
48 | |||
49 | h2. Documentation |
||
50 | |||
51 | * English User Manual: attachment:20651E.pdf |
||
52 | * English Installation Guide: attachment:20653.PDF |
||
53 | |||
54 | h2. Firmware |
||
55 | |||
56 | * 2.16: attachment:FW2AB.ZIP |